Monitoring water content changes in a soil profile with TDR-probes at just three depths - How well does it work?

Monitoramento das mudanças no conteúdo de água em um perfil do solo com sondas TDR em três profundidades - Como funciona?

ABSTRACT

TDR-probes are widely used to monitor water content changes in a soil profile (ΔW). Frequently, probes are placed at just three depths. This raises the question how well such a setup can trace the true ΔW. To answer it we used a 2 m deep high precision weighing lysimeter in which TDR-probes are installed horizontally at 20, 60 and 120 cm depth (one per depth). ΔW-data collected by weighing the lysimeter vessel were taken as the true values to which ΔW-data determined with the TDR-probes were compared. We obtained the following results: There is a time delay in the response of the TDR-probes to precipitation, evaporation, transpiration or drainage, because a wetting or drying front must first reach them. Also, the TDR-data are more or less point measurements which are then extrapolated to a larger soil volume. This frequently leads to errors. For these reasons TDR-probes at just three depths cannot provide reliable data on short term (e.g. daily) changes in soil water content due to the above processes. For longer periods (e.g. a week) the data are better, but still not accurate enough for serious scientific studies.

Keywords:
TDR; Soil water content; Measurement accuracy; Water balance