Abstract
The technique of laser cooling, whose basic idea was proposed in 1975 [1[1] W.D. Phillips, Rev. Mod. Phys. 70, 721 (1998).], provided the development of many important areas like high-resolution spectroscopy [2[2] W.M. Itano, J.C. Bergquist, R.G. Hulet and D.J. Wineland, Phys. Rev. A 36, 2220 (1987).], atomic clocks [3[3] N.F. Ramsey, Metrologia 42, S1 (2005).] and quantum gases confined in magnetic or optical traps [4[4] S. Chu, Scientific American 266, 71 (1992)., 5[5] E.A. Cornell and C.E. Wieman, Rev. Mod. Phys. 74, 875 (2002).]. Among the techniques applied to cooling neutral atoms is the optical molasses [6[6] P.D. Lett, W.D. Phillips, S.L. Rolston, C.E. Tanner, R.N. Watts and C.I. Westbrook, J. Opt. Soc. Am. B 6, 2084 (1989).] that will be explored in this work. Here we study the standard molasses and a new alternated molasses configuration, which consists of turning on just one pair of counter-propagating laser beams per cycle, and alternating this pair between the three spatial directions. We analyse the two techniques under the lens of the radiation force, by exploring a semiclassical treatment, in order to obtain the minimum energy attained by each of them at the end of the cooling process. We compare, then, these two cooling techniques, pointing out their advantages.
Keywords:
Laser cooling; Optical molasses; Semiclassical treatment; Doppler limit
1. Introduction
The development of the laser cooling and trapping methods for neutral atoms were essential to the progress of many fields. The reduction of the random thermal velocities using radioactive forces allowed the study of the atomic collisions and the determination of the atom inner structure with great accuracy [7[7] H.J. Metcalf and P. van der Straten, Laser Cooling and Trapping (Springer, New York, 1999).]. Associated to the magneto-optical trap [8[8] E. Tilman, I. Bloch and T.W. Hasch, Phys. Rev. A 58, R2664 (1998).] (MOT), this technique also formed the basis for the achievement of Bose-Einstein condensation in atomic gases [9[9] A.J. Leggett, Rev. Mod. Phys. 73, 307 (2001).], opening the way to a deeper understanding of the quantum-physical behaviour of gases at ultra-low temperatures.
In this Letter we describe the standard and the alternated optical molasses techniques, first introducing the concept of radiation force, making use of a semiclassical treatment to consider the interaction of electromagnetic radiation with the atomic system. This force is at the heart of the cooling technique, since it has the effect of dissipating the energy of the atoms and, thus, cooling them.
We determine the evolution of the atomic energy during the cooling process, for the standard and alternated molasses configurations.
By looking at the evolution of energy and its minimum, we can trace parallels between the two techniques and their advantages/disadvantages concerning the experimental process and the atomic densities reached by each one of them.
A gas of bosonic atoms enters in the quantum-degenerate regime and forms a Bose-Einstein condensate (BEC) if its spatial density exceeds a critical value, which is given approximately by the relation , where is the thermal de Broglie wavelength, is the temperature, h and are the Planck's and Boltzmann's constant, respectively, and the mass of an atom [10[10] S. Stellmer, B. Pasquiou, R. Grimm and F. Schreck, Phys. Rev. Lett. 110, 263003-1-263003-5 (2013).]. Low temperatures in combination with high densities have to be reached to obtain quantum degeneracy.
Since the early days of laser cooling, it has been asked if the quantum degenerate regime could be reached using this efficient method as the only cooling process. Until now, however, laser cooling has to be followed by evaporative cooling procedure [5[5] E.A. Cornell and C.E. Wieman, Rev. Mod. Phys. 74, 875 (2002).] to produce quantum degeneracy in cold atomic samples. The re-absorption of photons scattered during laser cooling [1[1] W.D. Phillips, Rev. Mod. Phys. 70, 721 (1998).] induces an effective repulsion and heating of the low energetic atoms. That is a severe obstacle to the required density be reached.
As will be shown, the alternated molasses configuration may be a better cooling technique in what concerns the spatial density of the atomic sample.
2. Radiation force
There are basically two kinds of forces exerted on an atomic system due to interaction with radiation: spontaneous and dipole forces [7[7] H.J. Metcalf and P. van der Straten, Laser Cooling and Trapping (Springer, New York, 1999).,11[11] H.J. Metcalf and P. van der Straten, J. Opt. Soc. Am. B 20, 887 (2003).]. The spontaneous force originates from the momentum transferred to the atom during the photon absorption or emission processes. Each photon transfers to the atom a momentum in a time interval related to the laser intensity, laser detuning and atomic excited state lifetime. Otherwise, the dipole force comes from the interaction of atomic electric dipole, that is, the induced electronic transition, with the gradient of the radiation intensity.
In this paper we used a semiclassical approach to consider the interaction of the radiation with the atomic system [12[12] R.J. Cook, Phys. Rev. A 20, 224 (1979).,13[13] J. Dalibard and C. Tannoudji, J. Opt. Soc. Am. B 2, 1707 (1985).], that is, we considered atoms, which will be treated quantum mechanically, interacting with a classical electromagnetic field. This theory, which is based on Ehrenfest's theorem and optical Bloch equations, have the advantage of giving an unified treatment to the radiation force, including effects of spontaneous emission and the induced dipole interaction, maintaining the simplicity of the most elementary theories. The atom considered in this theory has two energy levels (two-level quantum system).
Considering the atom moving sufficiently slow (), i.e., electric field amplitude () and phase time derivative () varying a small fraction during atomic excitation lifetime (), the force due to the interaction with the radiation will be given by
where is the Rabi frequency, which characterizes the coupling between the atom and the radiation; is the detuning between laser frequency and atomic resonant frequency , the latter proportional to the energy distance between the two energy levels; is the spontaneous emission rate and corresponds to the phase of electromagnetic field. Considering a plane wave with wavevector and frequency , the electromagnetic field is given by . We have, then, a constant Rabi-frequency and the field phase at the atom position is , with . For this particular condition, the radiation force reduces to the spontaneous force
where is the saturation parameter at resonance (), which is related to the laser intensity and limits the force magnitude. According to equation (2), the spontaneous force saturates at the maximum value , since the atom can not cycle between excited to ground state faster than / 2. The first term in the denominator of equation (2) is velocity dependent and, as the atom slows down, the Doppler shift brings it out of the resonance condition, lowering the force magnitude. In order to reach the deceleration that changes the atomic speed by hundreds of , it is necessary to compensate the Doppler shift to keep , either modifying or [11[11] H.J. Metcalf and P. van der Straten, J. Opt. Soc. Am. B 20, 887 (2003).].
Consider now two laser beams in the same direction ( direction - figure (1)), but in opposite sense (which we will call senses and ). Within a low laser intensity regime, the resulting force in the atomic system will be just the sum of the spontaneous force of each beam . For small atomic velocities, we can expand the sum to first order in
where is the atomic velocity in the laser direction and . For , that is, , there will be a dissipative viscous force acting in the direction, reducing the atom velocity.
Cooling process: two laser beams in opposite sense with laser frequency smaller than the atomic resonant frequency .
Writing this damping force as , we have the damping coefficient
This force has a maximum value that occurs for the saturation parameter and detuning . It is important to notice that equation (3) id only for low laser intensity regime [6[6] P.D. Lett, W.D. Phillips, S.L. Rolston, C.E. Tanner, R.N. Watts and C.I. Westbrook, J. Opt. Soc. Am. B 6, 2084 (1989).], since we consider the saturation term to be simply , which would be equivalent to assume that each wave saturates the atom independently. For higher intensities, the laser beams can not be considered independently anymore. Effects like stimulated emission have to be considered [11[11] H.J. Metcalf and P. van der Straten, J. Opt. Soc. Am. B 20, 887 (2003).], besides the dipole force due to the standing waves [14[14] J. Dalibard, Le Role des Fluctuations dans la Dynamique d'un Atome Couplé au Champ Électromagnétique. Thèse de Doctorat, Université de Paris, Paris, 1986.].
3. Optical molasses
As showed in the previous section, the combination of the opposite laser beams produces a viscous force that dissipates the energy of the atom to the electromagnetic field. To determine the total energy of the atomic system, however, we should consider the quantized nature of electromagnetic field to evaluate the contribution of the spontaneous emission process [15[15] R. Loudon, The Quantum Theory of Light (Oxford University Press Inc., New York, 2001), 3rd ed.], where an atom initially in an excited state can return to the ground state even in the absence of incident radiation (see figure (2)).
In spite of this random process does not change the mean atomic momentum (), since the phase and the direction of propagation of the radiation emitted are random, it increases, however, the atomic kinetic energy (). This additional energy is given by the recoil rate
which corresponds to the scattering rate of the laser light by the atom times its average kinetic energy. The latter can be calculated considering the atomic diffusion in the momentum space, with discrete walks of size at each absorption or emission process [16[16] V.S. Bagnato and S.C. Zilio, Revista Brasileira de Física 19, 127 (1989).], resulting in the following expression
In equation (6), is the stochastic parameter that will be determined for different molasses configurations (1D, 2D and 3D molasses).
We consider an isotropic emission process where , that is, the emission will have an equal probability for each direction, independently of the photon absorption direction. For the molasses, the probability of absorption will be in the direction of the laser and zero at the other two directions, giving
where represents the direction of the pair of laser beams and the other directions without the laser. Otherwise, for molasses, the probability of absorption will be for each laser beam direction. Hence, for this case
With the molasses, the diffusion will be in three dimensional momentum space, with the absorption probability for each direction, then
The balance between the energy lost due to dissipative cooling force and that acquired in the recoil process allow us to construct the dynamic equation for the atomic kinetic energy
In Eqs. (10), the indices N classifies the 1D, 2D and 3D molasses configuration, for the direction with () and without () laser illumination, which solutions will be explored in the following.
Solving these equations for , i.e., for molasses, with giving by equation (4) and by equation (7), we obtain
where is the initial kinetic energy in the directions and . The parameter represents the characteristic time for the cooling process, is the rate that the kinetic energy increases due to the spontaneous emission and is the heating in the characteristic time interval . The kinetic energy of the atom in the molasses configuration will be the sum of these solutions
and it is straightforward to verify that it has a minimum value at the time , with
Although the energy reaches a minimum value in the direction of the laser configuration, on the other hand, as it can be seen from equation (11b), to the other two directions, , the energy increases linearly in time. Then, for time intervals bigger than , the system starts to accumulate energy, since it is transferred to the directions without laser illumination, where we do not have the cooling process to control the recoil. This heating that occurs after in the molasses does not occur in laser beam arrangement. For , with the force given by equation (3) and the recoil term by equation (9), the differential equation for the total energy can be written as
Equating the energy rate to zero we obtain a stationary condition, where the energy is given by
Solving equation (14), in terms of the
According to equation (15), the minimum energy value is reached with a laser detuning of . Then, considering in this same equation, we obtain the Doppler cooling limit [7[7] H.J. Metcalf and P. van der Straten, Laser Cooling and Trapping (Springer, New York, 1999).]
4. Optical molasses with temporal alternated beams
In this section we introduce our new cooling technique, to be compared with the standard one, the alternated molasses configuration. It has one pair of lasers at each direction, which, however, will be alternately turned on during a selected time interval. A natural choice is to apply the characteristic time related to the cooling process. In the following we calculate the atomic kinetic energy evolution during the cooling cycles. Using the solution for molasses equation ((11)) we derive the following sequence, starting with the laser pair in
Considering now the lasers at , again turned on during a time interval
With the pair along the direction
Finally, after finished one cycle, we obtain
By using recurrence relations for the initial kinetic energy, after the second cycle we will have
With the same procedure
This initial sequence allows us to generalize the energy after cycles
After many cycles, i.e., for large values of , the second term of equation (24) converges to (the last two terms can be neglected). Then, the energy reaches a minimum value close to the expected limit given by equation (15)
5. Numerical Simulation
In this section we compare the atomic kinetic energy evolution resulted from the previous studied molasses configurations. For the simulation, we chose the atomic strontium species, since it has many advantages in the laser cooling context [17[17] S. Stellmer, M.K. Tey, B. Huang, R. Grimm and F. Schreck, Phys. Rev. Lett 103, 200401 (2009).]. We selected the isotope , which has an interest transition linewidth in the KHz region ( = 7.4 KHz), allowing the achievement of temperatures in the nanokelvin regime.
Figure 3 shows the atomic energy evolution in the standard molasses and the alternated optical molasses for the atomic vapour initial at K. The laser parameters were fixed to the values: (minimum energy condition), nm and (maximum atomic deceleration).
Comparison between the standard and the alternated molasses, showing the energy as a function of time for strontium atoms (energy rescaled by a factor ), leading to a temperature of .
As expected by our calculations, in both cases we have the same energy limit which correspondents to a temperature of nK.
6. Standard Optical Molasses versus Alternated Optical Molasses
It was shown above that the two techniques reach the same energy limit. While the standard molasses may be experimentally easier to perform when compared to the alternated molasses, since it does not require the alternation of the laser beams, our new configuration can possibly reach a higher phase space density.
The atomic density reached in magneto-optical traps has an upper bond value due to the repulsive forces between the atoms caused by the reabsorption of scattered photons, as stated before.
For a collection of atoms in a optical trap with laser field intensity , this force obeys the relation [18[18] T. Walker, D. Sesko and C. Wieman, Phys. Rev. Lett. 64, 408 (1990).]
where is the speed of light, and are the direct and scattered laser light, respectively, and is the atomic density.
Due to the intensity gradients, the confining lasers also produce an attenuation force in the trapped atoms [19[19] J. Dalibard, Optics Commun. 68, 203 (1988).], which compress the atomic cloud:
These two forces and must balance the trapping force due to the electromagnetic field in the limit that the temperature can be neglect, which implies a maximum achievable density
Thus, the force generated by the re-absorption of light gives an upper limit to the atomic density that is inversely proportional to the field intensity. Since in the alternated molasses this intensity is three times smaller than in the standard 3D molasses, the maximum density will be higher.
7. Conclusion
In this work we studied and compared two configurations of optical molasses. Starting with the semiclassical treatment of the laser-cooling concept, that is, explaining how neutral atoms interact with the radiation force, we determined and studied the dynamic equation that governs the atomic energy in a molasses configuration. This treatment allows us to shown that the atomic sample reaches the same minimum temperature expected for the standard and alternated molasses, without relevant increase in the cooling time. Remarkably, the alternated configuration has the advantage of reducing the power beam fluctuation during the cooling process. This factor is a problematic issue in the standard molasses configuration, that uses three retro-reflected laser beams. Otherwise, the alternated molasses can be produced with just one beam deflected between the three spatial directions, using acoustic-optic modulators with appropriate time interval ( kHz) [20[20] D.J. McCarron, A Guide to Acousto-Optic Modulators (Durham University, Durham, 2007).]. That reduces considerable this source of fluctuation between laser beams.
The main difference of both configurations, however, can be related to the atomic density reached in the magneto-optical traps, which is constraint due to the repulsive forces between the atoms caused by re-absorption of the scattered photons. As a practical matter, the power of the re-scattered light sets a limit to the number of atoms which can be confined in a magneto-optical trap, since the magnitude of this repulsive force depends on the laser field intensity . The alternated molasses will diminish the total light intensity incident on the atom sample if compared with the usual 3D molasses, favouring higher atomic density values in the trap. That is an important improvement of this particular method in the direction of bring the atomic sample to the quantum degenerate regime using the laser cooling technique alone.
References
-
[1]W.D. Phillips, Rev. Mod. Phys. 70, 721 (1998).
-
[2]W.M. Itano, J.C. Bergquist, R.G. Hulet and D.J. Wineland, Phys. Rev. A 36, 2220 (1987).
-
[3]N.F. Ramsey, Metrologia 42, S1 (2005).
-
[4]S. Chu, Scientific American 266, 71 (1992).
-
[5]E.A. Cornell and C.E. Wieman, Rev. Mod. Phys. 74, 875 (2002).
-
[6]P.D. Lett, W.D. Phillips, S.L. Rolston, C.E. Tanner, R.N. Watts and C.I. Westbrook, J. Opt. Soc. Am. B 6, 2084 (1989).
-
[7]H.J. Metcalf and P. van der Straten, Laser Cooling and Trapping (Springer, New York, 1999).
-
[8]E. Tilman, I. Bloch and T.W. Hasch, Phys. Rev. A 58, R2664 (1998).
-
[9]A.J. Leggett, Rev. Mod. Phys. 73, 307 (2001).
-
[10]S. Stellmer, B. Pasquiou, R. Grimm and F. Schreck, Phys. Rev. Lett. 110, 263003-1-263003-5 (2013).
-
[11]H.J. Metcalf and P. van der Straten, J. Opt. Soc. Am. B 20, 887 (2003).
-
[12]R.J. Cook, Phys. Rev. A 20, 224 (1979).
-
[13]J. Dalibard and C. Tannoudji, J. Opt. Soc. Am. B 2, 1707 (1985).
-
[14]J. Dalibard, Le Role des Fluctuations dans la Dynamique d'un Atome Couplé au Champ Électromagnétique Thèse de Doctorat, Université de Paris, Paris, 1986.
-
[15]R. Loudon, The Quantum Theory of Light (Oxford University Press Inc., New York, 2001), 3rd ed.
-
[16]V.S. Bagnato and S.C. Zilio, Revista Brasileira de Física 19, 127 (1989).
-
[17]S. Stellmer, M.K. Tey, B. Huang, R. Grimm and F. Schreck, Phys. Rev. Lett 103, 200401 (2009).
-
[18]T. Walker, D. Sesko and C. Wieman, Phys. Rev. Lett. 64, 408 (1990).
-
[19]J. Dalibard, Optics Commun. 68, 203 (1988).
-
[20]D.J. McCarron, A Guide to Acousto-Optic Modulators (Durham University, Durham, 2007).
Publication Dates
-
Publication in this collection
2017
History
-
Received
30 Mar 2017 -
Accepted
24 Apr 2017