B2O3/Al2O3 as a new, highly efficient and reusable heterogeneous catalyst for the selective synthesis of β-enamino ketones and esters under solvent-free conditions

ARTICLE

B₂O₃/Al₂O₃ as a new, highly efficient and reusable heterogeneous catalyst for the selective synthesis of β-enamino ketones and esters under solvent-free conditions

Jiu-Xi Chen^I; Chang-Fu Zhang^II; Wen-Xia Gao^I; Hui-Le Jin^I; Jin-Chang Ding^{I, II}; Hua-Yue WuI, ^*

^ICollege of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, 325035, China

^IIWenzhou Vocational and Technical College, Wenzhou, 325035, China

ABSTRACT

Boron oxide adsorbed on alumina (B₂O₃/Al₂O₃ ) has been found to be a new and highly efficient heterogeneous catalyst for the synthesis of β-enamino ketones and esters by the enamination of various primary and secondary amines with β-dicarbonyl compounds under solvent-free conditions. The important features of this methodology are broad substrate scope, high yield, no requirement of metal catalysts, high regio- and chemoselectivity and environmental friendliness. In addition, the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.

Keywords: β-enamino ketones, β-enamino esters, β-dicarbonyl compounds, amines, B₂O₃/Al₂O₃ , solvent-free

RESUMO

Óxido de boro adsorvido sobre alumina (B₂O₃/Al₂O₃ ) foi usado como um novo e eficiente catalisador na síntese de β-aminocetonas e ésteres pela enaminação de diferentes aminas primárias e secundárias com compostos carbonílicos sob condições livre de solvente. A importância dessa metodologia congrega grande variedade de substratos, alta eficiência, ausência de catalisador metálico, alta régio- e quimioseletividade em condições amigáveis ao ambiente. Ainda, o catalisador pode ser recuperado facilmente depois das reações e reusado sem perda de atividade.

Introduction

β-Enamino carbonylic compounds represent an important class of functionalized building blocks, which become increasingly important in medicinal chemistry and organic synthesis.¹ Consequently, various approaches toward the construction of β-enamino carbonylic compounds have been explored during the past years. The direct enamination of 1,3-dicarbonyl compounds with amines is one of the most straightforward methods for the synthesis of β-enamino ketones and esters in the presence of various promoting agents.^2-19 Recent reports have described the preparation of β-enamino ketones and esters catalyzed by metal triflate.²⁰ Although the reported methodologies are suitable for certain synthetic conditions, some of these procedures suffered from disadvantages, such as long reaction time, low yield, use of volatile organic solvents, requirement of excess of reagents or costly catalysts, special apparatus and harsh reaction conditions. Therefore, the development of convenient, environmental friendliness, high yield and clean approaches is highly desirable.

Recently, heterogeneous organic reactions²¹ have been recently performed with immobilized reagents on solid supports. These procedures offer several intrinsic advantages such as clean reactions, the easy separation of products, the recover and reuse of catalyst conveniently, the minimization of waste production, and eco-friendliness etc.

As a part of our great interest in developing novel synthetic routes for the formations of carbon-carbon and carbon-heteroatom bonds,²² we herein reported B₂O₃/Al₂O₃ as a new, efficient and reusable heterogeneous catalyst for the enamination of β-dicarbonyl compounds with amines.

Results and Discussion

The model reaction of ethyl acetoacetate (1a) with aniline (2a) was conducted to find the optimal reaction conditions and the initial results are listed in Table 1. First, the effect of solvents was tested. Among all the solvents tested, ethanol afforded better yield than some other solvents tested. As shown in Table 1, however, the presence of additional solvents lowered the reaction rate (Table 1, entries 1-4). So we chose to perform this reaction under solvent-free conditions (Table 1, entry 5). In contrast, the product 3a was obtained in 22% yield in the absence of B₂O₃/Al₂O₃ (Table 1, entry 8). When only Al₂O₃ was used as a catalyst, 3a was obtained in 40% yield (Table 1, entry 9). On the other hand, it was found that the yield was affected by adding different amount of B₂O₃/Al₂O₃ (Table 1, entries 5, 7-8). Thus, subsequent studies were carried out under the following optimized conditions, that are, 0.03 g B₂O₃/Al₂O₃ at room temperature in the absence of solvent.

With optimal conditions in hand, the reaction of different β-dicarbonyl compounds 1 with a range of primary, secondary, and aromatic amines 2 were examined to explore the scope of the reaction.

As shown in Table 2, a series of aromatic amines bearing either electron-donating or electron-withdrawing groups on aromatic ring were investigated. The substituent groups on the aromatic ring associated with amines did not show obvious effects in terms of yields under optimal conditions. It was observed that the corresponding β-enamino ketones and esters 3 were obtained in good to excellent yields. Aliphatic amines also reacted efficiently to give products 3m-3p in good yields, and the reaction time was shorter than that of aromatic amines (Table 2, entries 13-16). Moreover, secondary amines reacted to afford products 3q-3s in good yields but with longer reaction times (Table 2, entries 17-19).

Next, we investigated the reaction of β-dicarbonyl compounds 1 with diamines 4 (Table 3). In this reaction, two equivalents of 1 were required in order to have a complete conversion of diamines. When aliphatic diamine such as 1,3-propanediamine was examined, the corresponding bis-enamine products 5a and 5b were obtained in 95 and 99% yields, respectively. Moreover, when aromatic diamine such as 1,4-benzenediamine was examined, the corresponding bis-enamine products 5c and 5d were obtained in 88 and 97% yields, respectively.

However, when more sterically hindered aromatic diamine such as 1,2-benzenediamine was examined, the reaction only gave the mono-enamine products 6a and 6b using two equivalents and even three equivalents of β-dicarbonyl compounds.

On the other hand, we have investigated the efficiency of this catalyst for a few representative intermolecular competition studies (Scheme 1). The different reactivity of aromatic amines and aliphatic amines were demonstrated during the reaction of β-dicarbonyl compounds such as ethyl acetoacetate and acetylacetone with equimolar mixtures of aniline and n-propylamine (selectivity in favour of n-propylamine). Analysis of the mixture after 2 h showed that only n-propylamine reacted with ethyl acetoacetate and acetylacetone.

Finally, the reusability of B₂O₃/Al₂O₃ was further investigated in subsequent reactions, taking the additions of aniline to ethyl acetoacetate as an example (Scheme 2). The catalyst was easily recovered by simple filtration after diluting of the reaction mixture with ethyl acetate and was reused after being dried under vacuum. B₂O₃/Al₂O₃ was reused for four runs without evident loss of activity.

Conclusions

In conclusion, we have reported B₂O₃/Al₂O₃ as a highly efficient heterogeneous reusable catalyst for chemoselective enamination of β-dicarbonyl compounds with aliphatic and aromatic amines under solvent-free conditions. In addition, the important features of this procedure are mild reaction conditions, high yield, and operational simplicity which make it a useful and attractive strategy for the preparation of N-substituted β-enamino carbonylic compounds.

Experimental

Melting points were recorded on Digital Melting Point Apparatus WRS-1B and were uncorrected. ¹H NMR and ¹³C NMR spectra were taken on a Bruker DPX300 spectrometer using CDCl₃ as the solvent with tetramethylsilane (TMS) as an internal standard at room temperature. Chemical shifts were given in δ relative to TMS, the coupling constants J are given in Hz.

General procedure for the preparation of β-enamino ketones and esters

To a magnetically stirred mixture of the β-dicarbonyl compounds (1 mmol) and amines (1.1 mmol), B₂O₃/Al₂O₃ (0.03 g, 15% m/m) was added and the reaction mixture was stirred at room temperature for the appropriate time. The reaction was monitored by TLC. After completion of the reaction, the reaction mixture was diluted with ethyl acetate. The catalyst was separated by filtration, then the solution was washed with ethyl acetate (5 mL) and dried over anhydrous sodium sulfate, filtered and the solvent was evaporated under vacuum. The residue was purified by flash column chromatography to afford the desired product. The spectral and analytical data of all compounds are given in Supporting Information.

Supplementary Information

Supplementary data are available free of charge at http://jbcs.sbq.org.br, as PDF file.

Acknowledgments

We are grateful to the National Key Technology R&D Program (No. 2007BAI34B00) and the Natural Science Foundation of Zhejiang Province (No. Y4080107) for financial support.

References

1. Elassar, A. A.; El-Khairb, A. A.; Tetrahedron 2003, 59, 8463; David, O.; Blot, J.; Bellec, C.; Haviari, G.; Lhommet, G.; Gardette, D.; J. Org. Chem. 1999, 64, 3122; Felice, E.; Fioravanti, S.; Pellacani, L.; Tardella, P. A.; Tetrahedron Lett. 1999, 40, 4413; Potin, D.; Dumas, F.; D'Angelo, J.; J. Am. Chem. Soc. 1990, 112, 3483; Aceña, J. L.; Arjona, O.; Mañas, R.; Plumet, J.; J. Org. Chem. 2000, 65, 2580.

2. Microwave: Rechsteimer, B.; Texier-Boullet, F.; Hamelin, J.; Tetrahedron Lett. 1993, 34, 5071.

3. Ultrasound: Valduga, C. J.; Squizani, A.; Braibante, H. S.; Braibante, M. E. F.; Synthesis 1998, 1019; Brandt, C. A.; da Silva, A. C. M. P.; Pancote, C. G.; Brito, C. L.; da Silveira, M. A. B.; Synthesis 2004, 1157.

4. NaAuCl₄: Arcadi, A.; Bianchi, G.; Giuseppe, S. D; Marinelli, F.; Green Chem. 2003, 5, 64.

5. Zn(ClO₄)₂: Bartoli, G.; Bosco, M.; Locatelli, M.; Marcantoni, E.; Melchiorre, P.; Sambri, L.; Synlett 2004, 239.

6. Bi(TFA)₃: Khosropour, A. R.; Khodaei, M. M.; Kookhazadeh, M.; Tetrahedron Lett. 2004, 45, 1725.

7. CeCl₃: Khodaei, M. M.; Khosropour, A. R.; Kookhazadeh, M.; Synlett 2004, 1980.

8. Ceric ammonium nitrate: Duan, Z.; Li, T.; Xuan, X. J.; Wu, Y. J.; Chin. Chem. Lett. 2006, 17, 1566; Sridharan, V.; Avendano, C.; Menendez, J. C.; Synlett 2007, 881; Mo, L. P.; Liu, S. F.; Li, W. Z.; J. Chin. Chem. Soc. 2007, 54, 879.

9. 12-Tungstophosphoric acid: Chen, X.; She, J.; Shang, Z. C.; Wu, J.; Wu, H. F.; Zhang, P. Z.; Synthesis 2008, 3478.

10. InBr₃: Zhang, Z. H.; Yin, L.; Wang, Y. M.; Adv. Synth. Catal. 2006, 348, 184 and references cited therein.

11. ZrOCl₂·8H₂O: Zhang, Z. H.; Li, T. S.; Li, J. J.; Catal. Commun. 2007, 8, 1615.

12. CoCl₂: Zhang, Z. H.; Hu, J. Y.; J. Braz. Chem. Soc. 2006, 17, 1447.

13. Silica-supported sulfuric acid: Chen, X.; She, J.; Shang, Z. C.; Wu, J.; Zhang, P. Z.; Synth. Commun. 2009, 39, 947.

14. Silica-supported antimony(III) chloride: Zhang, L. F.; Yang, S. T.; Russ. J. Org. Chem. 2009, 45, 18.

15. Phosphotungstic acid: Li, G. C.; J. Chem. Res. 2007, 696.

16. Sulfated zirconia: Zhang, Z. H.; Song, L. M.; J. Chem. Res. 2005, 817.

17. SnCl₄: Tin tetrachloride: Zhang, Z. H.; Ma, Z. C.; Mo, L. P.; Indian J. Chem. 2007, 46B, 535.

18. Cu(NO₃)₂·3H₂O: Li, G. C., Monatsh. Chem. 2008, 139, 789.

19. ZrCl₄: Lin, J.; Zhang, L. F.; Monatsh. Chem. 2007, 138, 77.

20. Sc(OTf)₃: Yadav. J. S.; Kumar V. N.; Priyadarshini, A. D.; J. Mol. Catal. A: Chem. 2006, 256, 234; Er(OTf)₃: Dalpozzo, R.; De Nino, A.; Nardi, M.; Russo, B.; Procopio, A.; Synthesis 2006, 1127; Yb(OTf)₃: Epifano, F.; Genovese, S.; Curini, M.; Tetrahedron Lett. 2007, 48, 2717.

21. Blass, B. E.; Tetrahedron 2002, 58, 9301; Polshettiwar, V.; Kaushik, M. P.; Tetrahedron Lett. 2004, 45, 6255; Tamaddon, F.; Amrollahi, M. A.; Sharafat, L.; Tetrahedron Lett. 2005, 46, 7841; Hajipour, A. R.; Koshki, B.; Ruoho, A. E.; Tetrahedron Lett. 2005, 46, 5503.

22. Chen, J. X.; Wu, H. Y.; Zheng, Z. G.; Jin, C.; Zhang, X. X.; Su, W. K.; Tetrahedron Lett. 2006, 47, 5383; Chen, J. X.; Su, W. K.; Wu, H. Y.; Liu, M. C.; Jin, C.; Green Chem. 2007, 9, 972; Chen, J. X.; Wu, D. Z.; He, F.; Liu, M. C.; Wu, H. Y.; Ding, J. C.; Su, W. K.; Tetrahedron Lett. 2008, 49, 3814; Guo, W. X.; Chen, J. X.; Wu, D. Z.; Ding, J. C.; Chen, F.; Wu, H. Y.; Tetrahedron 2009, 65, 5240. Zhu, D. J.; Chen, J. X.; Liu, M. C.; Ding, D. C.; Wu, H. Y.; J. Braz. Chem. Soc. 2009, 20, 482.

Received: December 1. 2009

Web Release Date: April 27, 2010

Supplementary Information

Description of the products

(Z)-Ethyl 3-(phenylamino)but-2-enoate (3a)¹

Oil, IR (KBr) ν_max/cm^-1: 3456, 3258, 2979, 1610, 1495, 1442, 1370, 1270, 1162, 1056 cm^-1. ¹H NMR (300 MHz, CDCl₃): δ 10.41 (br s, 1H, NH), 7.30-7.35 (m, 2H), 7.08-7.18 (m, 3H), 4.71 (s, 1H), 4.17 (q, J 7.2 Hz, 2H), 2.01 (s, 3H), 1.32 (t, J 7.2 Hz, 3H). ¹³C MNR (75 MHz, CDCl₃): δ 170.4, 158.9, 139.3, 129.0, 124.9, 124.4, 85.9, 58.7, 20.3, 14.6.

(Z)-4-(Phenylamino)pent-3-en-2-one (3b)

Solid, mp: 47-49 ºC (Lit.¹ 48-49 ºC); IR (KBr) ν_max/cm^-1: 3349, 2980, 1605, 1499, 1432, 1276, 1183, 1017, 746; ¹H NMR (300MHz, CDCl₃): δ 12.46 (br s, 1H, NH), 7.25-7.30 (m, 2H), 7.03-7.15 (m, 3H), 5.14 (s, 1H), 2.05 (s, 3H), 1.93 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 196.0, 160.2, 138.6, 129.0, 125.5, 124.6, 97.6, 29.1, 19.8.

(Z)-Ethyl 3-(naphthalen-1-ylamino)but-2-enoate (3c)²

Oil; IR (KBr) ν_max/cm^-1:: 3246, 3056, 2978, 1605, 1441, 1384, 1266, 1165, 785; ¹H NMR (300MHz, CDCl₃): δ 10.61 (br s, 1H, NH), 8.06-8.09 (m, 1H), 7.86-7.89 (m, 1H), 7.75 (d, J 8.4 Hz, 1H), 7.26-7.57 (m, 4H), 4.83 (s, 1H), 4.23 (q, J 7.2Hz, 2H), 1.86 (s, 3H), 1.34 (q, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.7, 160.5, 135.3, 134.3, 130.4, 128.2, 126.7, 126.5, 126.4, 125.3, 123.6, 122.7, 85.7, 58.8, 20.04, 14.7.

(Z)-4-(Naphthalen-1-ylamino)pent-3-en-2-one (3d)

Solid, mp: 61-63 ºC (Lit.³ 51-53 ºC); IR (KBr) ν_max/cm^-1: 3430, 2972, 1600, 1550, 1425, 1278, 1078, 1015, 774; ¹H NMR (300MHz, CDCl₃): δ 12.76 (br s, 1H, NH), 8.02-8.05 (m, 1H), 7.87-7.90 (m, 1H), 7.77 (d, J 8.4Hz, 1H), 7.27-7.56 (m, 4H), 5.32 (s, 1H), 2.18 (s, 3H), 1.88 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 196.6, 161.9, 134.8, 134.2, 123.0, 128.2, 126.9, 126.9, 126.5, 125.5, 123.4, 122.8, 97.4, 29.2, 19.6.

(Z)-Ethyl 3-(p-toluidino)but-2-enoate (3e)¹

Oil; IR (KBr) ν_max/cm^-1: 3257, 3189, 2979, 1615, 1509, 1441, 1271, 1161, 1059, 792; ¹H NMR (300MHz, CDCl₃): δ 10.28 (br s, 1H, NH), 7.10-7.13 (m, 2H), 6.96-6.99 (m, 2H), 4.66 (s, 1H), 4.14 (q, J 7.2Hz, 2H), 2.33 (s, 3H), 1.95 (s, 3H), 1.28 (t, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.5, 158.8, 136.7, 134.9, 129.6, 124.7, 85.3, 58.7, 20.9, 20.3, 14.6.

(Z)-4-(p-Toluidino)pent-3-en-2-one (3f)

Solid, mp: 66-67 ºC (Lit.⁴ 68-69 ºC); IR (KBr) ν_max/cm^-1: 3448, 2922, 1607, 1508, 1434, 1276, 1178, 1013, 822, 753; ¹H NMR (300MHz, CDCl₃): δ 12.40 (br s, 1H, NH), 7.14 (d, J 8.4Hz, 2H), 7.00 (d, J 8.4Hz, 2H), 5.16 (s, 1H), 2.34 (s, 3H), 2.09 (s, 3H), 1.96 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 195.9, 160.7, 136.1, 135.5, 129.6, 124.8, 97.2, 29.1, 20.9, 19.7.

(Z)-Ethyl 3-(2-methoxyphenylamino)but-2-enoate (3g)⁵

Oil; IR (KBr) ν_max/cm^-1: 3262, 2976, 1614, 1464, 1376, 1220, 1161, 1037, 746; ¹H NMR (300MHz, CDCl₃): δ 10.28 (br s, 1H, NH), 7.08-7.14 (m, 2H), 6.88-6.92 (m, 2H), 4.71 (s, 1H), 4.16 (q, J 7.2Hz, 2H), 3.86 (s, 3H), 2.01 (s, 3H), 1.28 (t, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.2, 158.9, 152.6, 128.6, 125.3, 124.4, 120.3, 111.0, 86.3, 58.7, 55.7, 20.4, 14.6.

(Z)-4-(2-Methoxyphenylamino)pent-3-en-2-one (3h)⁵

Oil; IR (KBr) ν_max/cm^-1: 3456, 2949, 2841, 1607, 1481, 1344, 1274, 1180, 1025, 747; ¹H NMR (300MHz, CDCl₃): δ 12.32 (br s, 1H, NH), 7.01-7.18 (m, 2H), 6.87-6.93 (m, 2H), 5.20 (s, 1H), 3.86 (s, 3H), 2.10 (s, 3H), 1.99 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 195.9, 160.4, 152.8, 128.0, 126.2, 125.0, 120.3, 111.2, 97.8, 55.7, 29.1, 20.0.

(Z)-Ethyl 3-(3-chlorophenylamino)but-2-enoate (3i)⁶

Oil; IR (KBr) ν_max/cm^-1: 3190, 2979, 1637, 1476, 1370, 1270, 1164, 1074, 784; ¹H NMR (300MHz, CDCl₃): δ 10.42 (br s, 1H, NH), 7.10-7.22 (m, 3H), 6.94-6.96 (m, 1H), 4.72 (s, 1H), 4.15 (q, J 7.2Hz, 2H), 2.02 (s, 3H), 1.28 (t, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.3, 158.0, 140.7, 134.6, 130.0, 124.7, 123.9, 122.1, 87.5, 59.0, 20.4, 14.6.

(Z)-4-(3-Chlorophenylamino)pent-3-en-2-one (3j)

Solid, mp: 37-39 ºC (Lit.¹ 39-40 ºC); IR (KBr) ν_max/cm^-1: 3428, 2978, 1578, 1491, 1429, 1276, 1186, 1020, 937, 772; ¹H NMR (300MHz, CDCl₃): δ 12.47 (br s, 1H, NH), 6.98-7.29 (m, 4H), 5.22 (s, 1H), 2.11 (s, 3H), 2.02 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 196.4, 157.8, 140.2, 128.1, 127.5, 124.9, 118.3, 115.7, 97.0, 43.2, 19.3.

(Z)-Ethyl 3-(4-chlorophenylamino)but-2-enoate (3k)

Solid, mp: 52-54 ºC (Lit.¹ 54-55 ºC); IR (KBr) ν_max/cm^-1: 3457, 2980, 1633, 1491, 1383, 1272, 1160, 787; ¹H NMR (300MHz, CDCl₃): δ 10.34 (br s, 1H, NH), 7.22-7.26 (m, 2H), 6.97-6.99 (m, 2H), 4.69 (s, 1H), 4.12 (q, J 7.2Hz, 2H), 1.95 (s, 3H), 1.26 (t, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.4, 158.3, 138.0, 130.2, 129.2, 125.5, 86.9, 58.9, 20.2, 14.6.

(Z)-Ethyl 3-(4-bromophenylamino)but-2-enoate (3l)

Solid, mp: 53-55 ºC (Lit.³ 54-55 ºC); IR (KBr) ν_max/cm^-1: 3451, 3273, 2924, 1622, 1482, 1358, 1269, 1163, 1059, 786; ¹H NMR (300MHz, CDCl₃): δ 10.35 (br s, 1H, NH), 7.38-7.43 (m, 2H), 6.91-6.96 (m, 2H), 4.70 (s, 1H), 4.12 (q, J 7.2Hz, 2H), 1.97 (s, 3H), 1.26 (t, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.3, 158.2, 138.5, 132.1, 125.7, 117.9, 87.0, 58.9, 20.3, 14.6.

(Z)-Ethyl 3-(propylamino)but-2-enoate (3m)⁷

Oil; IR (KBr) ν_max/cm^-1: 3285, 2965, 1609, 1448, 1270, 1160, 1065, 784, 695; ¹H NMR (300MHz, CDCl₃): δ 8.51 (br s, 1H, NH), 4.36 (s, 1H), 4.00-4.03 (m, 2H), 3.07-3.11 (m, 2H), 1.85 (s, 3H), 1.49-1.53 (m, 2H), 1.16-1.18 (m, 3H), 0.90-0.91 (m, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.5, 161.8, 81.6, 58.0, 44.5, 23.5, 19.2, 14.5, 11.2.

(Z)-4-(Propylamino)pent-3-en-2-one (3n)⁸

Oil; IR (KBr) ν_max/cm^-1: 3451, 2960, 1603, 1443, 1359, 1295, 740, 647; ¹H NMR (300MHz, CDCl₃): δ 10.85 (br s, 1H, NH), 4.93 (s, 1H), 3.14-3.21 (m, 2H), 1.98 (s, 3H), 1.90 (s, 3H), 1.53-1.62 (m, 2H), 0.93-0.98 (m, 3H); ¹³C MNR (75MHz, CDCl₃): δ 194.8, 163.1, 95.0, 44.8, 28.7, 23.3, 18.8, 11.3.

(Z)-Ethyl 3-(benzylamino)but-2-enoate (3o)⁵

Oil; IR (KBr) ν_max/cm^-1: 3289, 2977, 1605, 1499, 1445, 1280, 1169, 1113, 786, 697; ¹H NMR (300MHz, CDCl₃): δ 8.96 (br s, 1H, NH), 7.24-7.37 (m, 5H), 4.54 (s, 1H), 4.43 (d, J 6.3Hz, 2H), 4.10 (q, J 7.2Hz, 2H), 1.92 (s, 3H), 1.26 (t, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.5, 161.7, 138.7, 128.7, 127.2, 126.6, 83.1, 58.3, 46.7, 19.3, 14.5.

(Z)-4-(Benzylamino)pent-3-en-2-one (3p)⁵

Oil; IR (KBr) ν_max/cm^-1: 3446, 2926, 1605, 1509, 1441, 1360, 1295, 1104, 1023, 739; ¹H NMR (300MHz, CDCl₃): δ 11.16 (br s, 1H, NH), 7.24-7.36 (m, 5H), 5.04 (s, 1H), 4.45 (d, J 6.3Hz, 2H), 2.03 (s, 3H) 1.91 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 195.3, 163.0, 138.0, 128.7, 127.3, 126.6, 95.8, 46.6, 28.8, 18.8.

4-(Diethylamino)pent-3-en-2-one (3q)⁹

Oil; IR (KBr) ν_max/cm^-1: 2975, 1628, 1538, 1439, 1355, 1193; ¹H NMR (300MHz, CDCl₃): δ 5.07 (s, 1H), 3.25-3.32 (m, 4H), 2.51 (s, 3H), 2.05 (s, 3H), 1.13-1.18 (m, 6H); ¹³C MNR (75MHz, CDCl₃): δ 194.1, 160.0, 93.8, 43.7, 15.1, 12.4.

4-Morpholinopent-3-en-2-one (3r)¹

Oil; IR (KBr) ν_max/cm^-1: 2964, 2854, 1640, 1544, 1431, 1257, 1184, 1119; ¹H NMR (300MHz, CDCl₃): δ 5.21 (s, 1H), 3.64-3.71 (m, 4H), 3.26-3.30 (m, 4H), 2.43 (s, 3H), 1.97 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 195.5, 160.6, 96.9, 66.5, 45.8, 30.7, 15.1.

Ethyl 3-morpholinobut-2-enoate (3s)⁹

Oil; IR (KBr) ν_max/cm^-1: 2970, 2854, 1688, 1584, 1435, 1259, 1144, 998, 805; ¹H NMR (300MHz, CDCl₃): δ 4.78 (s, 1H), 4.06-4.12 (m, 2H), 3.69-3.73 (m, 4H), 3.19-3.23 (m, 4H), 2.40 (s, 3H), 1.22-1.27 (m, 3H); ¹³C MNR (75MHz, CDCl₃): δ 168.6, 160.9, 88.1, 66.0, 58.4, 46.1, 15.0, 14.2.

(2Z, 2'Z)-Diethyl 3, 3'-(propane-1, 3-diylbis(azanediyl))dibut-2-enoate (5a)¹

Oil; IR (KBr) ν_max/cm^-1: 3283, 3193, 2977, 2248, 1604, 1270, 913, 787, 726, 554; ¹H NMR (300MHz, CDCl₃): δ 8.47 (br s, 2H, NH), 4.37 (s, 2H), 3.98 (q, J 7.2Hz, 4H), 3.22 (q, J 6.3Hz, 4H), 1.82 (s, 6H), 1.74-1.76 (m, 2H), 1.15 (t, J 7.2Hz, 6H); ¹³C MNR (75MHz, CDCl₃): δ 170.5, 161.7, 82.6, 58.2, 39.7, 30.9, 19.2, 14.5.

(3Z, 3'Z)-4, 4'-(Propane-1, 3-diylbis(azanediyl))dipent-3-en-2-one (5b)

Solid, mp: 43-45 ºC (Lit.¹⁰ 50-52 ºC); IR (KBr) ν_max/cm^-1: 3442, 2940, 1606, 1438, 1363, 1294, 1123, 1016, 742; ¹H NMR (300MHz, CDCl₃): δ 10.87 (br s, 1H, NH), 4.98 (s, 1H), 3.32-3.38 (m, 2H), 1.99 (s, 3H), 1.92 (s, 3H), 1.85-1.89 (m, 1H); ¹³C MNR (75MHz, CDCl₃): δ 195.2, 163.2 95.6, 39.6, 30.2, 28.8, 18.8.

(2Z,2'Z)-Diethyl 3,3'-(1,4-phenylenebis(azanediyl))dibut-2-enoate (5c)²⁷

Solid, mp: 135-137 ºC (Lit.¹¹ 135 ºC); IR (KBr) ν_max/cm^-1: 2450, 2979, 2929, 1617, 1484, 1385, 1256, 1056, 780, 679; ¹H NMR (300MHz, CDCl₃): δ 10.34 (br s, 2H, NH), 7.04 (s, 4H), 4.70 (s, 2H), 4.15 (q, J 7.2Hz, 4H), 2.00 (s, 6H), 1.29 (d, J 7.2Hz, 6H); ¹³C MNR (75MHz, CDCl₃): δ 170.3, 158.7, 136.2, 124.9, 86.2, 58.7, 20.2, 14.5.

(3Z,3'Z)-4,4'-(1,4-Phenylenebis(azanediyl))dipent-3-en-2-one (5d)²⁸

Solid, mp: 185-187 ºC (Lit.¹² 172 ºC); IR (KBr) ν_max/cm^-1: 3442, 2926, 1614, 1568, 1492, 1430, 1267, 1177, 1008, 865, 737; ¹H NMR (300MHz, CDCl₃): δ 11.96 (br s, 2H, NH), 7.07 (s, 4H), 5.19 (s, 2H), 2.10 (s, 6H), 2.00 (s, 6H); ¹³C MNR (75MHz, CDCl₃): δ 196.3, 159.8, 136.1, 125.1, 97.8, 29.1, 19.8.

(Z)-Ethyl 3-(2-aminophenylamino)but-2-enoate (6a)²⁹

Solid, mp: 77-79 ºC (Lit.¹³ 85 ºC); IR (KBr) ν_max/cm^-1: 3408, 3285, 2965, 1609, 1448, 1270, 1159, 1065, 784, 695; ¹H NMR (300MHz, CDCl₃): δ 9.70 (br s, 1H, NH), 7.04-7.10 (m, 2H), 6.68-6.76 (m, 2H), 4.72 (s, 1H), 4.15 (q, J 7.2Hz, 2H), 3.84 (br s, 2H, NH), 1.80 (s, 3H), 1.28 (t, J 7.2Hz, 3H); ¹³C MNR (75MHz, CDCl₃): δ 170.6, 161.5, 143.5, 128.6, 128.0, 124.7, 118.3, 115.6, 85.1, 58.7, 19.7, 14.6.

(Z)-4-(2-Aminophenylamino)pent-3-en-2-one (6b)

Solid, mp: 129-131 ºC (Lit.⁶ not reported); IR (KBr) ν_max/cm^-1: 3759, 3445, 2931, 1624, 1426, 1256, 1255, 1114, 765; ¹H NMR (300MHz, CDCl₃): δ 12.47 (br s, 1H, NH), 6.98-7.28 (m, 4H), 5.21 (s, 1H), 2.10 (s, 3H), 2.02 (s, 3H); ¹³C MNR (75MHz, CDCl₃): δ 196.7, 159.3, 140.1, 134.6, 130.1, 125.4, 124.5, 122.6, 98.4, 29.3, 19.9.

References

1. Zhang, Z. H.; Yin, L.; Wang, Y. M.; Adv. Synth. Catal. 2006, 348, 184.

2. Khodaei, M. M.; Khosropour, A. R.; Kookhazadeh, M.; Synlett 2004, 1980.

3. Xu, F.; Lv, H.-X.; Wang, J.-P.; Tian, Y.-P.; Wang, J.-J.; J. Chem. Res. 2008, 707.

4. Roberts, E.; Turnur, E. E.; J. Chem. Soc. 1927, 1832.

5. Chen, X.; She, J.; Shang, Z. C.; Wu, J.; Wu, H. F.; Zhang, P. Z.; Synthesis 2008, 3478.

6. Song, Z. Y.; Bai, D. R.; Yu, H. T.; Xu, L. L.; Zhang, W. X.; Meng, J. B.; Matsuura, T.; Chin. Chem. Lett. 2004, 15, 127.

7. Jacobs, J.; Kesteleyn, B.; De Kimpe, N.; Tetrahedron 2008, 64, 7545.

8. Zhang, Y.; Raines, A. J.; Flowers, R. A.; J. Org. Chem. 2004, 69, 6267.

9. Vohra, R. K.; Renaud, J. L.; Bruneau, C.; Synthesis 2007, 731.

10. Zhang, Z. H.; Hu, J.-Y; J. Braz. Chem. Soc. 2006, 17, 1447.

11. Bangdiwala, B. P.; Desai, C. M.; J. Indian Chem. Soc. 1954, 31, 688.

12. Kudryavtsev, A. S.; Savich, I. A.; Khimiya 1962, 17, 57.

13. Sexton, W. A.; J. Chem. Soc. 1942, 303.

Publication Dates

• Publication in this collection
  14 Oct 2011
• Date of issue
  2010

History

• Received
  01 Dec 2009
• Accepted
  27 Apr 2010