PARTICLEBOARDS MANUFATURED WITH UREA-FORMALDEHYDE UNDER THE ADDITION OF POWDER TANNIN

ABSTRACT

This work aimed to evaluate the technological properties of particleboards manufactured with particles of Acacia mangium and urea-formaldehyde adhesive by addition of powder form commercial tannin of Acacia mearnsii to their particles. The particleboards manufactured under different compaction ratio and the effect of these in the properties of the boards evaluated. It used a completely randomized design in the factorial outline 4 x 4 as follows: four percentages of substitution of powder form tannin to the adhesive urea-formaldehyde - 0, 10, 20 and 30%; and four nominal compaction ratios: 1.39, 1.55, 1.73, and 2.00. The pressing cycle used was 3.92 specific pressure with temperature of 140ºC by 8 minutes. The addition of powder tannin to particles with urea-formaldehyde provided some improvements in the physical and mechanical properties. The results indicate that the addition of tannin powder is a viable alternative of use in particleboards, with no need for dilution.

Keywords:
natural adhesive; density; compaction ratio; Acacia mangium