ABSTRACT
This research was developed aiming at evaluating the feasibility of the use of 5 species of tropical pine to plywood manufacture. The following species were studied: Pinus caribaea, Pinus chiapensis, Pinus maximinoi, Pinus oocarpa, Pinus tecunumannii and Pinus taeda, being the last used as the referential species. Plywood were manufactured with 5 plies, bonded with ureaformaldheyde and fenol-formaldheyde resin. The results of thickness sweeling and recovering were the same for all species studied, with exception to thickness sweeling for the boards glued with fenolformaldheyde resin. The boards made from Pinus maximinoi and Pinus oocarpa, showed the higher values in modulus of elasticity. The boards of Pinus maximinoi, Pinus oocarpa and Pinus taeda, glued with fenol-formaldheyde resin, resulted in higher values of the modulus of rupture, in comparison to other species. For the glue line strength, the boards of Pinus maximinoi, Pinus taeda and Pinus chiapensis, showed the better results. Based on the general results of this research it, could be said that the Pinus maximinoi and Pinus oocarpa present the high potentiality to plywood manufacture.
Key words:
Tropical pine; plywood; glue line strength