INTRODUCTION: LED light-curing devices seek to provide a cold light activator which allows protocols of material polymerization with shorter duration. OBJECTIVE: The present study aimed to evaluate the shear bond strength of bracket bonding using three types of light-curing devices: One with halogen light (Optilight Plus - Gnatus) and two with LEDs (Optilight CL - Gnatus and Elipar Freelight - 3M/ESPE). RESULTS: Comparing the results by analysis of variance, the Gnatus LED device showed an inferior statistical behavior in relation to other light sources, when activated by a short time. But, when it was used for 40 seconds, the polymerization results were consistent with the other evaluated sources. The device with the best average performance was the halogen light, followed by the 3M/ESPE LED. CONCLUSION: It was concluded that the LEDs may be indicated in orthodontic practice, as long as a protocol is used for the application of light with the activation time of 40 seconds.
Orthodontics; Shear bond strength; Orthodontic brackets; Dental bonding
