ASYMMETRIC WETTED SECTOR ANGLE IN WATER DISTRIBUTION OF TRAVELING GUN IRRIGATION SYSTEMS

ABSTRACT

This work aimed to simulate the water distribution of traveler gun irrigation, working with asymmetrical wetted angles and in windy conditions. In the simulations of a sprinkler with uniform radial profile, the following were considered: i) wetted angles between 180 and 330°; ii) wetted angle asymmetries from 0 to 90°; iii) wind speeds from 0 to 4.5 m s^-1; and iv) wind direction of 0, 45, and 90°. Christiansen uniformity coefficients (CU) were calculated for strip widths from 30 to 100% of the sprinkler wetted diameter (WD). Regardless of the wetted angle adjustment, irrigations under wind speeds of 4.5 m s^-1 should be avoided and strip spacings of less than 50% WD provide high CU for wind speeds up to 3.0 m s^-1. For any wind conditions, asymmetries in the wetted angle led to a reduction in CU for a wetted angle of 210°. In the range of wetted angle from 270 to 330°, asymmetric adjustments of up to 20° provided a higher CU than 80% for a wind speed of 3 m s^-1 and directions diagonal and perpendicular to the travel path associated with strip spacings between 60 to 70% WD, which are the spacings recommended by manufacturers of traveler irrigation machines.

KEYWORDS
strip width; travel path; uniformity coefficient