ABSTRACT
The control of microbial growth is an increasing challenge in the production of oil and gas, since the presence of certain bacteria has economic and environmental negative impacts. Sulphate reducing bacteria are particularly problematic, since they are responsible for the biological corrosion associated with the production of hydrogen sulfide, an effect known as souring. The main form of control is the use of biocides; however, this strategy, in addition to requiring continuous application, has proven to be ineffective in the elimination of biofilms and is associated with a high risk of water contamination. Therefore, it is necessary to seek more efficient and specific approaches to microbiological control. The use of bacteriophage viruses meets these needs, because after they multiply, they usually cause cell lysis, releasing new viral particles and preventing the bacteria from proliferating. In view of this, this study proposes to establish a method for the concentration and detection of bacteriophages of Sulphate Reducing Bacteria present in reactor water from oil wells. The samples were collected from two reactors, operated in a batch fed to simulate an oil well. The reactor water samples were first clarified, viruses adsorbed to sediment were eluted and then concentrated by ultracentrifugation. The viral concentrate was then purified with Vertrel-XF. Experimental seeding of P1 myophage in water samples from the reactor revealed a viral recovery rate of 27.7%, compared to the 16% obtained by use of other protocols.
Keywords:
sulphate reducing bacteria; souring; microbial control; bacteriophage
Thumbnail
