Recrystallization Study of the Al4.5wt%Cu Alloy Conventionally and Unidirectionally Solidified, Deformed and Heat Treated

Abstract

The Al4.5wt%Cu is an aeronautical and automobile alloy with extensive use in industry for structural purposes. The aim of this work was to evaluate two different solidification processes of the Al4.5wt%Cu alloy, conventional and unidirectional, as well as its recrystallization process. Firstly, the Al4.5wt%Cu alloy was deformed by cold rotary forging and then heat treated at temperatures that varied from 250 to 450 °C. The samples for analysis were obtained after 54, 76 and 91% of reductions in area. Tests of optical microscopy, scanning electron microscopy and Vickers microhardness were performed to evaluate the recrystallization process. The results indicated that the recrystallization started at 350 ºC, being that the conventional samples presented full recrystallization after 5 minutes, while the unidirectional samples presented only partial recrystallization. In general, both solidification processes presented similar results for all of the analysis performed.

Keywords:
Al4.5wt%Cu alloy; Conventional and Unidirectional Solidification; Rotary Swaging Process; Recrystallization Temperature; Recrystallization Kinetics