Effect of Anodization on the Stress Corrosion Cracking Behavior of The AZ61 Magnesium Alloy in 0.1 M NaCl Solution

In the present work, the AZ61 alloy, one of the most important commercial structural magnesium alloys, was anodized in three different alkaline electrolytes consisting of 3 M KOH + 0.15 M Na₂SiO₃ + 0.1 M Na₂B₄O₇.10H₂O, 3 M KOH + 0.5 M Na₃PO₄ and 3 M KOH + 0.50 M Na₂SiO₃. The treatment was conducted at two different current densities, 20 and 30 mA.cm^-2 for 10 minutes. The anodized layers were characterized by scanning electron microscopy, X-ray diffractometry and X-ray photoelectron spectroscopy. The corrosion resistance was assessed by potentiodynamic polarization tests. The SCC behavior was studied using slow strain rate tests in 0.1 M NaCl solution at room temperature. Conventional tensile tests were also conducted in air. The susceptibility to SCC was dependent on the morphology of the anodized film. The composition of the electrolyte and the current density of the anodization treatment affected the SCC susceptibility of the AZ61 alloy. The best corrosion resistance and the lowest susceptibility to SCC were obtained for samples anodized in the borate-containing electrolyte at 30 mA.cm^-2. The smooth and compact surface morphology of the anodized film obtained in this condition was the main reason for the improved SCC behavior of the AZ61 alloy.

Keywords:
stress corrosion cracking; AZ61; magnesium alloy; anodization