Acessibilidade / Reportar erro

CuI Film Produced by Chemical Extraction Method in Different Media

Abstract

CuI crystalline thin films were produced on substrates (commercial glass) using chemical extraction method in different chemical bath media. In this study, their structural, optical and electrical properties were analyzed. Transmittance, absorption, optical band gap and refractive index of the films were examined by UV/VIS spectrum. XRD data showed that the film has a hexagonal structure for CuI. Surface and elemental (in terms of ratio) analysis of the films were performed via SEM and EDX analysis. The highest average grain size of CuI was observed for the film produced in aqueous media whereas the lowest average grain size was seen in chloroform bath. The curve formed by the number of crystallites per unit area (N) is different than the curves of dislocation density and average grain size. Number of crystallites per unit area has reached its maximum value in CCl4 bath, but it has been decreased in chloroform bath. In addition, film thickness has varied between 1232 nm and 3624 nm according to the solvent of bath.

Keywords
CuI films; Chrystal growth; Thin film; Optical properties

ABM, ABC, ABPol UFSCar - Dep. de Engenharia de Materiais, Rod. Washington Luiz, km 235, 13565-905 - São Carlos - SP- Brasil. Tel (55 16) 3351-9487 - São Carlos - SP - Brazil
E-mail: pessan@ufscar.br