Acessibilidade / Reportar erro

Optically transparent membrane based on bacterial cellulose/polycaprolactone

Abstract

Optically transparent membranes from bacterial cellulose (BC)/polycaprolactone (PCL) have been prepared by impregnation of PCL acetone solution into dried BC membranes. UV-Vis measurements showed an increase on transparency in BC/PCL membrane when compared with pristine BC. The good transparency of the BC/PCL can be related to the presence of BC nanofibers associated with deposit of PCL nano-sized spherulites which are smaller than the wavelength of visible light and practically free of light scattering. XRD results show that cellulose type I structure is preserved inside the BC/PCL membrane, while the mechanical properties suggested indicated that PCL acts as a plasticizer for the BC membrane. The novel BC/PCL membrane could be used for preparation of fully biocompatible flexible display and biodegradable food packaging.

Bacterial cellulose; polycaprolactone; transparent membrane


Optically transparent membrane based on bacterial cellulose/polycaprolactone

H. S. BarudI; S. J. L. RibeiroI; C. L. P CaroneII; R. LigabueII; Sandra EinloftII; P. V. S. QueirozIII; A. P. B. BorgesIII; V. D. JahnoIV

IInstitute of Chemistry, São Paulo State University - UNESP, Brazil

IILaboratório de Organometálicos e Resinas - LOR, PUC-RS, Porto Alegre, RS, Brazil

IIIDepartment of Veterinary, Federal University of Viçosa - UFV, Brazil

IVInstitute of Exact Sciences and Technology, FEEVALE, Brazil

Correspondence to Correspondence to: H. S. Barud Institute of Chemistry São Paulo State University - UNESP CP 355, CEP 14801-970, Araraquara, SP, Brazil e-mail: hernane.barud@gmail.com

ABSTRACT

Optically transparent membranes from bacterial cellulose (BC)/polycaprolactone (PCL) have been prepared by impregnation of PCL acetone solution into dried BC membranes. UV-Vis measurements showed an increase on transparency in BC/PCL membrane when compared with pristine BC. The good transparency of the BC/PCL can be related to the presence of BC nanofibers associated with deposit of PCL nano-sized spherulites which are smaller than the wavelength of visible light and practically free of light scattering. XRD results show that cellulose type I structure is preserved inside the BC/PCL membrane, while the mechanical properties suggested indicated that PCL acts as a plasticizer for the BC membrane. The novel BC/PCL membrane could be used for preparation of fully biocompatible flexible display and biodegradable food packaging.

Keywords: Bacterial cellulose, polycaprolactone, transparent membrane.

Introduction

In the last years bacterial cellulose (BC)-based materials have been largely investigated aiming the utilization in opto-electronic devices[1-3]. The main applications of these novel materials include BC membranes as substrates for flexible organic lighting emission (FOLED)[4], optically transparent BC-composites[5] and matrix for electronic papers[6].

Bacterial cellulose membranes are produced by Gluconacetobacter xylinus strain in carbohydrate rich culture medium. The obtained BC hydrogels presents 3-D cellulose network nanofiber, high crystallinity (60-90%), high mechanical strength and full biocompatibility[7]. Cellulose nanofibers are considered highly effective reinforcements to produce high-performance optically composites that have mechanical properties similar to those of metals[1]. In fact, BC nanofibers are practically free of light scattering, showing also small thermal expansion coefficient, which is an important property for fillers in optoelectronic devices[1-2].

Recent efforts have been devoted in the preparation of optically transparent BC composites associated with other biodegradable polymers. Transparent biocompatible nanocomposite was prepared by adding bacterial cellulose membrane into poly (L-lactic acid) (PLLA) matrix[8].

New transparent nanocomposites based on different chitosan matrices and bacterial cellulose were prepared by a fully green procedure by casting a water based suspension of chitosan and bacterial cellulose nanofibrils. The BC-chitosan composites were highly transparent, flexible and displayed better mechanical properties than the corresponding unfilled chitosan films[9].

A biocompatible polymeric composite PHB/BC was prepared by incorporating bacterial cellulose (BC) into poly (3-hydroxybutyrate) (PHB) matrix. The transparency of the PHB/BC nanocomposite was higher than pure BC membrane. BC also improved the thermal stability of PHB in the nanocomposite film[10].

Bacterial cellulose - poly (vinyl alcohol) nanocomposites were prepared by an in-situ process. The addition of a small amount of PVA turned the BC membranes in an optical transparent material with excellent mechanical properties[11].

Polycaprolactone (PCL) is a hydrophobic, semi-crystalline polymer; its crystallinity tends to decrease with the increase of the molecular weight. The good solubility of PCL in organic solvents, its low melting point (59-64 °C) and the exceptional blend-compatibility has stimulated an extensive research of the potential application of this material in the biomedical field[12].

The goal of this work was the preparation and characterization of a new optically transparent membrane based on dried bacterial cellulose and polycaprolactone (PCL).

Experimental Section

Bacterial cellulose was prepared according to a method described recently[13]. Polycaprolactone diol (MM = 2000, Aldrich) was used as received. The dried BC membranes (6 × 6 cm2, 12 µm thick) were previously swollen for 48 hours in acetone. Acetone-swollen BC membrane was soaked in 25 mL of 3% (w/v) PCL acetone solution during 72 hours. After this, BC/PCL membranes were washed several times with acetone to remove the excess of PCL. They were dried at 40 °C for 12 hours in Teflon plates. The PCL content in the nanocomposite was 12.0% (w/w), determined by gravimetric measurements. Scanning electron microscopy (SEM) images were obtained in a Field Emission Scanning Electron Microscope JEOL JSM - 7500F. Samples were coated with tick carbon layer. XRD patterns were obtained in a Siemens Kristalloflex diffractometer using nickel filtered Cu Kα radiation, step pass of 0.02° and a step time of 3 seconds, from 4 to 50° (2θ angle). Thermal degradation analysis was performed using a Q600 SDT (TA Instruments). The samples were heated from 25-600 °C of temperature with open platinum pans under dynamic nitrogen atmosphere and at heating rate of 20 °C min - 1. The mechanical measurements were performed with a Dynamic Mechanical Analyzer (DMA) Q 800 (TA Instruments) equipped with a film tension clamp at a temperature of 27 °C. The specimens were cut in dimensions of 5.50 mm × 6.20 mm × 0.02 mm (length × width × thickness). The device was previously calibrated and a total of 4 measurements for each sample were made in order to ensure the reproducibility of the results.

Results and Discussion

The Figure 1 shows the optical transmission spectra for pristine BC membrane and BC/PCL biocomposite. Pure PCL material does not form stable films.


Pristine BC membrane, Figure 1a (inset), is a semi-transparent material presenting an average transmittance at 550 nm of around 45%[4]. The light transmittance of BC/PCL membrane is 84% at 550 nm (Figure 1b). The high transmittance is due primarily to the lateral size of the reinforcing elements; the light scattering is avoided by BC nanofibers which are smaller than the wavelength of light[1]. This increase on the transparency in the visible range of the electromagnetic spectrum is an important characteristic for the fabrication of flexible OLEDs[1-4].

SEM image of the BC membrane surface, Figure 2a, reveals a 3-D fibrilar organization consisting of an ultrafine cellulose nanofibers network named "nanocelluloses". The micrograph of the surface of BC/PCL membrane, Figure 2b, show BC nanofibrills covered by PCL, resulting in a smooth surface morphology, suggesting a good interaction between the two phases.


The cross-section image of pristine BC is shown in Figure 2c. A plate-like material is clearly observed with numerous sheets forming a network of nanofibrills. SEM images for BC/PCL, Figure 2d suggest that PCL molecules completely filled the porous between BC nanofibrills. The image reveals that PCL is deposited as nano-sized spherulites. The improved transparency of the membranes can be associated with two aspects, the first one is due to the presence of BC nanofibers, as discussed above and the other aspect refers to the presence of PCL like nano-sized spherulite, which are smaller than the wavelength of visible range[10].


Analysing the XRD patterns, it was possible to observe a broad diffraction peaks at 15° and 22.5° for the pure BC membrane, Figure 3a, which are typical of cellulose type I. These peaks are assigned to the characteristic interplane distances of cellulose 1α and 1β phases[14]. The diffraction pattern obtained for the PCL is characteristic of the semi-crystalline polymer with two diffraction peaks, around 21.5 and 23.5 degrees. Moreover, the peaks were sharp and indicated that the samples were highly crystalline materials[15]. Cellulose type I patterns were observed for BC/PCL membrane, Figure 3c, confirming that BC structure is preserved during preparation. Meanwhile, a difference can be observed in the relative intensity of the BC peaks, suggesting a change in the orientation of the cellulose fibres in the presence of PCL[11].


The TGA curve obtained for pure BC membrane (Figure 4a) shows two events of weight loss. The first gradual one involving 5% of mass loss occurred from room temperature up to 150 °C and can be associated with water loss of the BC surface; the second one, observed with maxima temperature at 374 °C, is attributed to BC pyrolysis[10]. TG curve for PCL (Figure 4b) shows only one weight loss event starting at around 260 °C up to 490 °C, with maxima temperature near to 400 °C. This event occurs due to the thermal decomposition of PCL[15].


The TGA curve for BC/PCL membrane (Figure 4c) presents a thermal behavior close to pure BC membrane. A small and continuous mass loss event (around 3%) is observed from room temperature up to 150 °C. Comparing with pure BC membrane a slight decrease (around 10 degrees) on thermal degradation of the BC/PCL membrane was observed. Probably, the presence of PCL nanosized particles may be promoting a breakdown in the hydrogen bonds between cellulose chains.

The PCL spherulite-nanosized in the BC/PCL membrane induced a decrease on the tensile strength (112 ± 7.0 MPa) and Young's Modulus (3.6 ± 0.8 GPa) as compared a pure BC membrane, tensile strength (124 ± 8.1 MPa) and Young's Modulus (16.4 ± 2.3 GPa). In the same way, it was observed an increase on the elongation at break for BC/PCL (5.4 ± 0.5 GPa) as compared with the pure BC membrane (1.1 ± 0.3 GPa). The PCL spherulite-nanosized could increase the mobility of the cellulose chains, acting as a plasticizer for BC membrane. The increase in this property is an important feature for preparation of fully biocompatible flexible display and biodegradable food packaging.

Conclusions

Novel optically transparent membrane based on bacterial cellulose (BC) and polycaprolactone (PCL) has been prepared by impregnation of PCL acetone solution into dried BC membrane. UV-Vis measurements showed an increase on transparency in BC/PCL membrane when compared to pristine BC membrane. The good transparency quality of the biocomposites can be associated with the presence of BC nanofibers, and principally due to the deposited of PCL nano-sized spherulites which are smaller than wavelength of visible range.

Acknowledgements

The authors acknowledge Brazilian agencies CNPq, CAPES, FAPESP, FAPERGS, PRONEX/FAPERGS/CNPq and FINEP for financial support. We would like to thank the LMA-IQ for FEG-SEM facilities

Enviado: 05/04/12

Reenviado: 17/07/12

Aceito: 18/07/12

  • 1. Nakagaito, A. N.; Nogi, M. & Yano, H. - MRS Bull., 35, p.214 (2010). http://dx.doi.org/10.1557/mrs2010.654
  • 2. Nogi, M. & Yano, H. - Adv. Mater., 20, p.1849 (2008). http://dx.doi.org/10.1002/adma.200702559
  • 3. Ummartyotin, S.; Juntaro, J.; Sain, M. & Manuspiy, H. - Ind. Crop. Prod., 35, p.92 (2012).
  • 4. Legnani, C.; Vilani, C.; Calil, V. L.; Barud, H. S.; Quirino, W. G.; Achete, C. A.; Ribeiro, S. J. L. & Cremona, M. - Thin Solid Films., 517, p.1016-1020 (2008). http://dx.doi.org/10.1016/j.tsf.2008.06.011
  • 5. Nogi, M.; Handa, K.; Nakagaito, A. N. & Yano, H. - Appl. Phys. Lett., 87, p.243110 (2005). http://dx.doi.org/10.1063/1.2146056
  • 6. Shah, J. & Brown Junior, R. M. - Appl. Microbiol. Biotechnol., 66, p.352 (2005). PMid:15538556. http://dx.doi.org/10.1007/s00253-004-1756-6
  • 7. Gardner, D. J.; Oporto, G. S.; Mills, R. & Azizi Samir, M. A. S. - J. Adhes. Sci. Tech.. 22, p.545 (2008). http://dx.doi.org/10.1163/156856108X295509
  • 8. Kim, Y.; Jung, R.; Kim, H. S. & Jin, H. J. - Curr. Appl. Phys., 70, p.1148 (2008).
  • 9. Fernandes, S. C. M.; Oliveira, L.; Freire, C. S. R.; Silvestre, A. J. D.; Pascoal Neto, C.; Gandini, A. & Desbriéres, J. - Green. Chem., 11, p.2023 (2009). http://dx.doi.org/10.1039/b919112g
  • 10. Zhijiang, C. & Guang, Y. - Mater. Lett., 65, p.182 (2011). http://dx.doi.org/10.1016/j.matlet.2010.09.055
  • 11. Gea, S.; Bilotti, E.; Reynolds, C. T.; Soykeabkeaw, N. & Peijs, T. - Mater. Lett., 64, p.901 (2010). http://dx.doi.org/10.1016/j.matlet.2010.01.042
  • 12. Labet, M. & Thielemans, W. - Chem. Soc. Rev., 38, p.3484 (2009). PMid:20449064. http://dx.doi.org/10.1039/b820162p
  • 13. Caiut, J. M. A.; Barud, H. S.; Santos, M. V.; Menezes, J.; Messaddeq, Y. & Ribeiro, S. J. L. - Proceedings SPIE., 8104, p.81040Z-1 (2011). http://dx.doi.org/10.1117/12.895418
  • 14. Wada, M. & Okano, T. - Cellulose, 8, p.183 (2001). http://dx.doi.org/10.1023/A:1013196220602
  • 15. Machado, A. V.; Botelho, G.; Silva, M. M.; Neves, I. C. & Fonseca, A. M. - J. Polym. Res., 18, p.1743 (2011). http://dx.doi.org/10.1007/s10965-011-9580-z
  • Correspondence to:

    H. S. Barud
    Institute of Chemistry
    São Paulo State University - UNESP
    CP 355, CEP 14801-970, Araraquara, SP, Brazil
    e-mail:
  • Publication Dates

    • Publication in this collection
      20 Feb 2013
    • Date of issue
      2013

    History

    • Received
      05 Apr 2012
    • Accepted
      18 July 2012
    • Reviewed
      17 July 2012
    Associação Brasileira de Polímeros Rua São Paulo, 994, Caixa postal 490, São Carlos-SP, Tel./Fax: +55 16 3374-3949 - São Carlos - SP - Brazil
    E-mail: revista@abpol.org.br