Cement-bonded particleboards of rubberwood were manufactured with four clones of Hevea brasiliensis Müll. Arg. (rubberwood): IAN 717, IAN 873, GT 711 and AVROS 1301. Boards of 450 x 450 x 13 mm were manufactured in a ratio of 1:4:1 (wood/cement/water), weight basis, with 1.4 g/cm³ density and 4% calcium chloride dihydrated - CaCl2.2H2O as accelerator. The particles of four clones were tested in treated and untreated conditions, totaling eight treatments. In each treatment with four replicates, the physical and mechanical properties were evaluated according to ASTM D 1037 - 96a standard. Overall, the best mechanical and physical results were obtained with the cement-bonded particleboard made with particles from clone AVROS 1301. Rubberwood has shown to be "highly inhibitory" in the hydration test, however when CaCl2 was added the inhibition index decreased and was classified as "low inhibitory". Rubberwood is technically feasible to make cement-bonded particleboard.
Particleboards; wood-cement-bonded; rubberwood; properties
