Acessibilidade / Reportar erro

Assessment of the influence of the type of aggregates and rehydration on concrete submitted to high temperatures

Abstracts

The behavior of concrete under fire is being studied by a group at the Structures and Civil Engineering Laboratory of the Civil Engineering, Archi- tecture and Urbanism College in UNICAMP. This work presents an investigation on the loss of mechanical strength of different concrete mixes after submitted to high temperatures and on the influence of rehydration. Mixtures were prepared with three different aggregates: expanded clay, basalt and limestone. Test bodies were submitted to temperatures of 300 ºC and 600 ºC under the same heating rate as that of Curve ISO-834 (1999). After heat treatment, some of the test bodies were rehydrated in air, some were immerged in water and others were wrapped up in plastic film dur- ing 28, 56 and 112 days. At these ages, concretes were evaluated in relation to compression strength, tension strength and modulus of elasticity, therefore providing an assessment of the influence of the aggregate type and rehydration on the recovery of mechanical strength.

concrete; high temperatures; mechanical properties; rehydration


O efeito do comportamento do concreto perante o fogo está sendo estudado por um grupo formado no Laboratório de Estruturas e Construção Civil da Faculdade de Engenharia Civil, Arquitetura e Urbanismo da UNICAMP. Este trabalho apresenta uma investigação sobre a perda de re- sistência mecânica ocorrida em diferentes misturas de concreto depois de submetidas a temperaturas elevadas, bem como, uma investigação da influência da reidratação. As misturas foram preparadas com três diferentes agregados: argila expandida, basalto e calcário. Os corpos-de-prova C, obedecendo a mesma taxa de 300 ºC e 600 ºC foram submetidos às temperaturas de 300 aquecimento da Curva ISO-834 (1999). Após o trata- mento térmico, parte dos corpos-de-prova foram reidratados ao ar, outra parte foi imersa em água e outros envolvidos em filme plástico durante 28, 56 e 112 dias. Nestas idades os concretos foram caracterizados em relação à resistência à compressão, resistência à tração e módulo de elasticidade e assim uma avaliação da influência do tipo de agregado e da reidratação na recuperação da resistência mecânica pôde ser feita.

concreto; altas temperaturas; propriedades mecânicas; reidratação


Assessment of the influence of the type of aggregates and rehydration on concrete submitted to high temperatures

A. A. A. de SouzaI; A. L. Moreno JrII

IDoutoranda, Departamento de Estruturas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo, UNICAMP, ambrosio@fec.unicamp.br , Rua Saturnino de Brito, 135, Cidade Universitária Zeferino Vaz, Barão Geraldo, Campinas, SP, Brasil, cep: 13083 - 852

IIProfessor Doutor , Departamento de Estruturas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo, UNICAMP, almoreno@fec.unicamp.br , Rua Saturnino de Brito, 135, Cidade Universitária Zeferino Vaz, Barão Geraldo, Campinas, SP, Brasil, cep: 13083 - 852

ABSTRACT

The behavior of concrete under fire is being studied by a group at the Structures and Civil Engineering Laboratory of the Civil Engineering, Archi- tecture and Urbanism College in UNICAMP. This work presents an investigation on the loss of mechanical strength of different concrete mixes after submitted to high temperatures and on the influence of rehydration. Mixtures were prepared with three different aggregates: expanded clay, basalt and limestone. Test bodies were submitted to temperatures of 300 ºC and 600 ºC under the same heating rate as that of Curve ISO-834 (1999). After heat treatment, some of the test bodies were rehydrated in air, some were immerged in water and others were wrapped up in plastic film dur- ing 28, 56 and 112 days. At these ages, concretes were evaluated in relation to compression strength, tension strength and modulus of elasticity, therefore providing an assessment of the influence of the aggregate type and rehydration on the recovery of mechanical strength.

Keywords: concrete, high temperatures, mechanical properties, rehydration .

Texto completo disponível apenas em PDF.

Full text avaliable only in PDF.

5. References

  • [01]   AMERICAN CONCRETE INSTITUTE. Guide for determining the fire endurance of concrete elements. ACI 216R – 89. New York, 1996.
  • [02]   ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Exigências de resistência ao fogo de elementos construtivos de edificações. – NBR 14432, Rio de Janeiro, 2001.
  • [03]   INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. Fire-resistance tests – Elements of building construction. Part 1: General requirements. ISO-1. Geneva, 1999.
  • [04]   NEVILLE, A. M. Propriedades do Concreto, Editora Pini, São Paulo, 1997.
  • [05]   LANDI, F. R.  Ação do incêndio sobre estruturas de concreto armado. Boletim técnico n° 01/86 PCC-EPUSP, São Paulo, 1986.
  • [06]   LIN, Wei-Ming; LIN, T. D.; POWERS-COUCHE, L. J. Microstructures of Fire Damaged Concrete. ACI Materials Journal. Vol. 93, N° 3. Technical Paper. ACI – American Concrete Institute. New York, May-June, 1996.
  • [07]   METHA, P. K.; MONTEIRO, P. M. Concreto: estrutura, propriedades e materiais. Ed. PINI. São Paulo, 1994.
  • [08]   SOUZA, A. A. A.; MORENO Jr., A. L. Efeito de altas temperaturas na resistência à compressão, resistência à tração e módulo de deformação do concreto. In: V Simpósio EPUSP sobre Estruturas de Concreto. São Paulo, 2003.
  • [09]   MORENO Jr., A. L.; BIZZO, L. B. P. Estudo do comportamento do concreto sob o efeito de temperaturas elevadas. In: Encontro Nacional de Betão Estrutural. Porto – Portugal, 2004.
  • [10]   CARASLINDAS, H.; BARROS, R.C. Portugal, 2004. Degradação das Propriedades Mecânicas do Betão Exposto a Altas Temperaturas. In: Encontro Nacional de Betão Estrutural. Porto.
  • [11]   CÀNOVAS, M.F.  Patologia e terapia do concreto armado. Editora Pini, São Paulo, 1988.
  • [12]       ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Preparação do concreto em laboratório. - NBR 12821, Rio de Janeiro, 1993.
  • [13]   ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Procedimento para moldagem e cura de corpos-de-prova. – NBR 5738, Rio de Janeiro, 2003.
  • [14]   ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS.Projeto de estrutura de concreto em situação de incêndio. – NBR15200, Rio de Janeiro, 2004.

Publication Dates

  • Publication in this collection
    18 Sept 2014
  • Date of issue
    Dec 2010

History

  • Accepted
    27 Aug 2010
  • Received
    30 Sept 2009
IBRACON - Instituto Brasileiro do Concreto Instituto Brasileiro do Concreto (IBRACON), Av. Queiroz Filho, nº 1700 sala 407/408 Torre D, Villa Lobos Office Park, CEP 05319-000, São Paulo, SP - Brasil, Tel. (55 11) 3735-0202, Fax: (55 11) 3733-2190 - São Paulo - SP - Brazil
E-mail: arlene@ibracon.org.br