Figure 1
Beam collapse in Arizona (EUA). Source: Oesterle et al. [44 R. G. Oesterle et al., Investigation of Red Mountain Freeway Bridge Girder Colapse (CTL Group Project 262291). Skokie, IL, USA: Bridge Group, Arizona Dept. Transp., Nov 2007, pp. 67.]
Figure 2
Scheme for the analyzed beam. Source: Authors.
Figure 3
Trajectory of the resulting self-weight during rollover. Source: Adapted from Krahl et al. [1313 P. A. Krahl, M. F. A. Oliveira, G. H. Siqueira, and M. C. V. Lima, "Analytical nonlinear rollover behavior of cambered precast concrete beams on flexible supports," J. Struct. Eng., vol. 146, no. 2, pp. 04019200, 2020.]
Figure 4
Decomposition for checking the cracking moment. Source: Adapted from Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 4
Decomposition for checking the cracking moment. Source: Adapted from Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 5
Structure of the parametric analysis algorithm. Source: Authors.
Figure 6
Schematic representation of the bearing pad. Units in [mm]. Source: Authors.
Figure 7
Load applied by the stiffness to the rotation angle of the beam. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 8
Results of base data for beam with initial eccentricity and initial rotation angle. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 9
Variation of initial lateral eccentricity. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 10
Variation of the initial rotation. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 11
Variation of the characteristic resistance to concrete compression. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 12
Variation of the stiffness of the bearing pad. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 13
Cross-sections of the beams with modifications to the width of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 14
Beam BT-54 with width variation of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 15
Beam BT-63 with width variation of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 16
Beam BT-72 with width variation of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 17
Beams BT-54, BT-63 and BT-72 with 100% of the top flange width. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 9
Variation of initial lateral eccentricity. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 10
Variation of the initial rotation. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 11
Variation of the characteristic resistance to concrete compression. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 12
Variation of the stiffness of the bearing pad. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 13
Cross-sections of the beams with modifications to the width of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 14
Beam BT-54 with width variation of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 15
Beam BT-63 with width variation of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 16
Beam BT-72 with width variation of the top flange. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]
Figure 17
Beams BT-54, BT-63 and BT-72 with 100% of the top flange width. Source: Oliveira [1212 M. F. A. Oliveira, “Estudo analítico do tombamento de vigas pré-moldadas sobre almofadas de apoio,” M.S. thesis, Prog. Pós-grad. Eng. Civ., Univ. Fed. Uberlândia, Uberlândia, 2019.]