SILVA NETO et al. [20[20] SILVA NETO, A.P.A., BRITES, B.G., SANTOS, L.L., “Substituição do agregado miúdo por resíduo proveniente do beneficiamento do mármore e granito (rbmg) em argamassa”, Bacharelado, Uniderp, Campo Grande, 2016.] |
8 |
SILVA [21[21] SILVA, I.A.C., “Adição de fibras de papel kraft e gesso reciclado em argamassas de assentamento”, Bacharelado, Universidade Federal de Goiás, Catalão, 2019.] |
1 |
LARA et al. [22[22] LARA, G.T.D., SALVADOR, C.M., GARCIA, R.S., “Análise comprarativa de resistência à compressão entre argamassas de revestimento à base de cal hidratada e aditivo plastificante líquido”, Revista Funec Científica Multidisciplinar, v. 6, n. 8, pp. 180–197, 2017.] |
2 |
ARAÚJO [23[23] ARAÚJO, N.N., “Desempenho de argamassas de revestimentos produzidas com agregados reciclados oriundos do resíduo de construção e demolição da Grande Natal-RN”, Tese de M.Sc., UFRN, Natal, 2014.] |
24 |
TOKARSKI et al. [24[24] TOKARSKI, R.B., MATOSKI, A., CECHIN, L., et al., “Comportamento das argamassas de revestimento no estado fresco, compostas com areia de britagem de rocha calcária e areia natural”, Matéria (Rio de Janeiro), v. 23, n. 3, pp. e12196, Out. 2018. doi: http://doi.org/10.1590/s1517-707620180003.0530. https://doi.org/10.1590/s1517-7076201800...
] |
3 |
CHEAH e RAMLI [25[25] CHEAH, C.B., RAMLI, M., “Mechanical strength, durability and drying shrinkage of structural mortar containing HCWA as partial replacement of cement”, Construction & Building Materials, v. 30, pp. 320–329, Maio. 2012. doi: http://doi.org/10.1016/j.conbuildmat.2011.12.009. https://doi.org/10.1016/j.conbuildmat.20...
] |
4 |
LEE e RAO [26[26] LEE, T., RAO, M.-K., “Recycling municipal incinerator fly- and scrubber-ash into fused slag for the substantial replacement of cement in cement-mortars”, Waste Management (New York, N.Y.), v. 29, n. 6, pp. 1952–1959, Jun. 2009. doi: http://doi.org/10.1016/j.wasman.2009.01.002. PubMed PMID: 19216067 https://doi.org/10.1016/j.wasman.2009.01...
] |
2 |
POLAD et al. [27[27] PALOD, R., DEO, S.V., RAMTEKKAR, G.D., “Utilization of waste from steel and iron industry as replacement of cement in mortars”, Journal of Material Cycles and Waste Management, v. 21, n. 6, pp. 1361–1375, Nov. 2019. doi: http://doi.org/10.1007/s10163-019-00889-3. https://doi.org/10.1007/s10163-019-00889...
] |
1 |
APOLINÁRIO [28[28] APOLINÁRIO, E.C.A., “Influência da adição do resíduo provenietne do corte de mármore e granito (rcmg) nas propriedades de argamassas de cimento portland”, Tese de M.Sc., UFBA, Salvador, 2014.] |
24 |
SILVA et al. [29[29] SILVA, A.R., CABRAL, C., PINTO, E.N.M.G., “Substituição parcial do cimento portland por resídio de cerâmica vermelha em argamassas: estudo da atividade pozolânica”, In: XXII Congresso Brasileiro de Engenharia e Ciência dos Materiais – CBECiMat, Natal, 2016.] |
2 |
MOURA [30[30] MOURA, A.A., “Argamassa com substituição parcial do cimento por resíduos industriais”, M.Sc. Thesis, Universidade Tecnológica Federal do Paraná, Curitiba, 2018.] |
5 |
FORMIGONI e PAVEI [31[31] FORMIGONI, M.W., PAVEI, E.G., “Análise da influência da substituição parcial do cimento portland por residuos de placas cerâmicas desconformes na argamassa”, Trabalho de Conclusão de Curso, Unesc, Criciúma, 2016.] |
1 |
TRENTIN et al. [32[32] TRENTIN, P.O., MANICA, J., VANZETTO, S.C., et al., “Substituição parcial de agregado miúdo por resíduo de vidro moído na produção de argamassa”, Matéria (Rio de Janeiro), v. 25, n. 1, pp. e–12576, 2020. doi: http://doi.org/10.1590/s1517-707620200001.0903. https://doi.org/10.1590/s1517-7076202000...
] |
4 |
GUERRA e LUZ [33[33] GUERRA, T.D., LUZ, P.M.S.G., “Argamassas manufaturadas com substituição parcial do cimento por pet triturado”, In: Congresso Nacional de Pesquisa e Ensino de Ciências, p. 1–9, 2018.] |
3 |
RIBEIRO [34[34] RIBEIRO, K.B. “Influência da substituição de cimento por pentóxido de nióbio na resistência à compressão de argamassas”, In: Relatório de Iniciação Cienífica, Brasília, UniCEUB, 2019.] |
4 |
PIMENTEL et al. [35[35] PIMENTEL, L.L., PISSOLATO JUNIOR, O., JACINTHO, A.E.P.G.D.A., et al., “Argamassa com areia proveniente da britagem de resíduo de construção civil – Avaliação de características físicas e mecânicas”, Matéria (Rio de Janeiro), v. 23, n. 1, pp. e11969, Mar. 2018. doi: http://doi.org/10.1590/s1517-707620170001.0305. https://doi.org/10.1590/s1517-7076201700...
] |
6 |
PCZIECZEK et al. [36[36] PCZIECZEK, A., EFFTING, C., GOMES, I.R., et al., “Statistical analysis of mechanical properties of mortars with fly ash and waste tire rubber”, Revista IBRACON de Estruturas e Materiais, v. 12, n. 4, pp. 790–811, Ago. 2019. doi: http://doi.org/10.1590/s1983-41952019000400005. https://doi.org/10.1590/s1983-4195201900...
] |
1 |
MUZARANA e POSSAN [37[37] MAZURANA, L., POSSAN, E., “Carbonation and CO2 uptake in rendering mortars produced with recycled construction and demolition waste”, In: Memorias CONPAT 2019, 2019.] |
9 |
SANTOS et al. [38[38] SANTOS, R.A.D., LIRA, B.B., RIBEIRO, A.C.M., “Argamassa com substituição de agregado natural por resíduo de britagem de granito, Revista Eletrônica em Gestão”, Educação e Tecnologia Ambiental, v. 8, n. 8, pp. 1818–1828, Jan. 2013.] |
5 |
BONFIM et al. [39[39] BONFIM, W.B., CARVALHO, I.M., DE PAULA, H.M., “Uso de lama residual de concreto como substituto da cal hidratada para produção de argamassas de revestimento”, Revista Eletrônica de Engenharia Civil, v. 15, n. 2, pp. 75–87, Sep. 2019.] |
2 |
MARVILA et al. [40[40] MARVILA, M., AZEVEDO, A., ZANELATO, E., et al., “Interference of the water / cement ratio in the technological properties of mortars in the hardened state”, In: 63 Congresso Brasileiro de Cerâmica, Bonito, 2019.] |
24 |
FERRARI et al. [41[41] FERRARI, J.R., SILVA, R.V.D., LOUZADA, D.M., et al., “Reuse of printed circuit boards substrate in the production of mortars”, Tecnologica em Metalurgia, Materiais e Mineração, v. 19, pp. e2656, 2022. doi: http://doi.org/10.4322/2176-1523.20222656. https://doi.org/10.4322/2176-1523.202226...
] |
1 |
KURZ et al. [42[42] KURZ, M.N., BRANDELLI, T.M., PALIGA, C.M., et al., “A potencialidade do uso de resíduo de borracha de pneu em argamassa: análise das propriedades físicas e mecânicas”, Matéria (Rio de Janeiro), v. 23, n. 3, pp. e12154, Out. 2018. doi: http://doi.org/10.1590/s1517-707620180003.0488. https://doi.org/10.1590/s1517-7076201800...
] |
2 |
AGRAWAL et al. [43[43] AGRAWAL, Y., SIDDIQUE, S., SHARMA, R.K., et al., “Valorization of granite production dust in development of rich and lean cement mortar”, Journal of Material Cycles and Waste Management, v. 23, n. 2, pp. 686–698, Mar. 2021. doi: http://doi.org/10.1007/s10163-020-01158-4. https://doi.org/10.1007/s10163-020-01158...
] |
54 |
MORICONI [44[44] MORICONI, G., “Environmentally-friendly mortars: a way to improve bond between mortar and brick”, Materials and Structures, v. 36, n. 264, pp. 702–708, Out. 2003. doi: http://doi.org/10.1617/13872. https://doi.org/10.1617/13872...
] |
6 |
MOHAMMADHOSSEINI et al. [45[45] MOHAMMADHOSSEINI, H., LIM, N.H.A.S., TAHIR, M., et al., “Performance evaluation of green mortar comprising ceramic waste as cement and fine aggregates replacement”, SN Applied Sciences, v. 1, n. 6, pp. 557, Jun. 2019.] |
3 |
AMIN et al. [46[46] AMIN, S.K., ALLAM, M.E., GARAS, G.L., et al., “A study of the chemical effect of marble and granite slurry on green mortar compressive strength”, Bulletin of the National Research Center, v. 44, n. 1, pp. 19, Dez. 2020. doi: http://doi.org/10.1186/s42269-020-0274-8. https://doi.org/10.1186/s42269-020-0274-...
] |
4 |
RAMJAN et al. [47[47] RAMJAN, S., TANGCHIRAPAT, W., JATURAPITAKKUL, C., “Effects of binary and ternary blended cements made from palm oil fuel ash and rice husk ash on alkali-silica reaction of mortar”, Arabian Journal for Science and Engineering, v. 43, n. 4, pp. 1941–1954, Abr. 2018. doi: http://doi.org/10.1007/s13369-017-2843-1. https://doi.org/10.1007/s13369-017-2843-...
] |
2 |
SINGH et al. [48[48] SINGH, L.P., GOEL, A., BHATTACHHARYYA, S.K., et al., “Effect of morphology and dispersibility of silica nanoparticles on the mechanical behaviour of cement mortar”, International Journal of Concrete Structures and Materials, v. 9, n. 2, pp. 207–217, Jun. 2015. doi: http://doi.org/10.1007/s40069-015-0099-2. https://doi.org/10.1007/s40069-015-0099-...
] |
4 |
BU et al. [49[49] BU, J., TIAN, Z., ZHENG, S., et al., “Effect of sand content on strength and pore structure of cement mortar”, Journal of Wuhan University of Technology-Material Science and Education, v. 32, n. 2, pp. 382–390, Apr. 2017.] |
12 |
NING et al. [50[50] NING, B., XU, J., CHEN, S., “Mechanical properties and solidified mechanism of tailings mortar with waste glass”, Journal of Wuhan University of Technology-Material Science and Education, v. 30, n. 6, pp. 1240–1246, Dec. 2015.] |
4 |
MAHIR MAHMOD et al. [51[51] MAHIR MAHMOD, H., FARAH NORA AZNIETA, A.A., GATEA, S.J., “Evaluation of rubberized fibre mortar exposed to elevated temperature using destructive and non-destructive testing”, KSCE Journal of Civil Engineering, v. 21, n. 4, pp. 1347–1358, Maio. 2017. doi: http://doi.org/10.1007/s12205-016-0721-0. https://doi.org/10.1007/s12205-016-0721-...
] |
1 |
AADI et al. [52[52] AADI, A.S., MOHAMMED ALI, T.K., ALI, R.A.A., et al., “The mechanical properties of green mortar contained aluminum wastes as substitution of sand”, Materials Today: Proceedings, v. 42, pp. 3002–3009, 2021. doi: http://doi.org/10.1016/j.matpr.2020.12.812. https://doi.org/10.1016/j.matpr.2020.12....
] |
3 |
LI et al. [53[53] LI, L.G., LIN, Z.H., CHEN, G.M., et al., “Reutilizing clay brick dust as paste substitution to produce environment-friendly durable mortar”, Journal of Cleaner Production, v. 274, pp. 122787, Nov. 2020. doi: http://doi.org/10.1016/j.jclepro.2020.122787. https://doi.org/10.1016/j.jclepro.2020.1...
] |
4 |
LI et al. [54[54] LI, L.G., ZHUO, Z.Y., ZHU, J., et al., “Adding ceramic polishing waste as paste substitute to improve sulphate and shrinkage resistances of mortar”, Powder Technology, v. 362, pp. 149–156, Fev. 2020. doi: http://doi.org/10.1016/j.powtec.2019.11.117. https://doi.org/10.1016/j.powtec.2019.11...
] |
4 |
PATEL et al. [55[55] PATEL, D., SHRIVASTAVA, R., TIWARI, R.P., et al., “Properties of cement mortar in substitution with waste fine glass powder and environmental impact study”, Journal of Building Engineering, v. 27, pp. 100940, Jan. 2020. doi: http://doi.org/10.1016/j.jobe.2019.100940. https://doi.org/10.1016/j.jobe.2019.1009...
] |
3 |
ZHAO et al. [56[56] ZHAO, Z., BENZERZOUR, M., ABRIAK, N.-E., et al., “Use of uncontaminated marine sediments in mortar and concrete by partial substitution of cement”, Cement and Concrete Composites, v. 93, pp. 155–162, Out. 2018. doi: http://doi.org/10.1016/j.cemconcomp.2018.07.010. https://doi.org/10.1016/j.cemconcomp.201...
] |
4 |
DEMIR et al. [57[57] DEMIR, İ., GÜZELKÜCÜK, S., SEVIM, Ö., “Effects of sulfate on cement mortar with hybrid pozzolan substitution”, Engineering Science and Technology an International Journal, v. 21, n. 3, pp. 275–283, Jun. 2018.] |
5 |
NARS et al. [58[58] NASR, M.S., ALI, I.M., HUSSEIN, A.M., et al., “Utilization of locally produced waste in the production of sustainable mortar”, Case Studies in Construction Materials, v. 13, pp. e00464, Dez. 2020. doi: http://doi.org/10.1016/j.cscm.2020.e00464. https://doi.org/10.1016/j.cscm.2020.e004...
] |
4 |
RAINI et al. [59[59] RAINI, I., JABRANE, R., MESRAR, L., et al., “Evaluation of mortar properties by combining concrete and brick wastes as fine aggregate”, Case Studies in Construction Materials, v. 13, pp. e00434, Dez. 2020. doi: http://doi.org/10.1016/j.cscm.2020.e00434. https://doi.org/10.1016/j.cscm.2020.e004...
] |
15 |
JUSTO-REINOSO et al. [60[60] JUSTO-REINOSO, I., SRUBAR III, W.V., CAICEDO-RAMIREZ, A., et al., “Fine aggregate substitution by granular activated carbon can improve physical and mechanical properties of cement mortars”, Construction & Building Materials, v. 164, pp. 750–759, Mar. 2018. doi: http://doi.org/10.1016/j.conbuildmat.2017.12.181. https://doi.org/10.1016/j.conbuildmat.20...
] |
6 |
AZEVEDO et al. [61[61] AZEVEDO, A.R.G., CECCHIN, D., CARMO, D.F., et al., “Analysis of the compactness and properties of the hardened state of mortars with recycling of construction and demolition waste (CDW)”, Journal of Materials Research and Technology, v. 9, n. 3, pp. 5942–5952, Maio. 2020. doi: http://doi.org/10.1016/j.jmrt.2020.03.122. https://doi.org/10.1016/j.jmrt.2020.03.1...
] |
4 |
ABADOU et al. [62[62] ABADOU, Y., GHRIEB, A., BUSTAMANTE, R., “Crushed concrete waste influence on dune sand mortar performance. Contribution to the valorization”, Materials Today: Proceedings, v. 33, pp. 1758–1761, 2020. doi: http://doi.org/10.1016/j.matpr.2020.04.871. https://doi.org/10.1016/j.matpr.2020.04....
] |
28 |
KABEER e VYAS [63[63] KABEER, K.I.S.A., VYAS, A.K., “Experimental investigation on utilization of dried marble slurry as fine aggregate in lean masonry mortars”, Journal of Building Engineering, v. 23, pp. 185–192, Maio 2019. doi: http://doi.org/10.1016/j.jobe.2019.01.034. https://doi.org/10.1016/j.jobe.2019.01.0...
] |
10 |
SELVAJANRAN et al. [64[64] SELVARANJAN, K., NAVARATNAM, S., GAMAGE, J.C.P.H., et al., “Thermal and environmental impact analysis of rice husk ash-based mortar as insulating wall plaster”, Construction & Building Materials, v. 283, pp. 122744, Maio. 2021. doi: http://doi.org/10.1016/j.conbuildmat.2021.122744. https://doi.org/10.1016/j.conbuildmat.20...
] |
2 |
CHAHOUR e SAFI [65[65] CHAHOUR, K., SAFI, B., “Mechanical behavior and chemical durability of marble-based mortar: application to panels subjected to punching”, Construction & Building Materials, v. 232, pp. 117245, Jan. 2020. doi: http://doi.org/10.1016/j.conbuildmat.2019.117245. https://doi.org/10.1016/j.conbuildmat.20...
] |
15 |
SINGH CHOUHAN et al. [66[66] SINGH CHOUHAN, H., SINGH CHOUHAN, R., KALLA, P., et al., “Effect of Kota stone slurry on strength properties of cement mortar mixes”, Materials Today: Proceedings, v. 44, pp. 4557–4562, 2021. doi: http://doi.org/10.1016/j.matpr.2020.10.814. https://doi.org/10.1016/j.matpr.2020.10....
] |
3 |
SAFI et al. [67[67] SAFI, B., SAIDI, M., DAOUI, A., et al., “The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM)”, Construction & Building Materials, v. 78, pp. 430–438, Mar. 2015. doi: http://doi.org/10.1016/j.conbuildmat.2015.01.009. https://doi.org/10.1016/j.conbuildmat.20...
] |
3 |
KABAY et al. [68[68] KABAY, N., MIYAN, N., ÖZKAN, H., “Utilization of pumice powder and glass microspheres in cement mortar using paste replacement methodology”, Construction & Building Materials, v. 282, pp. 122691, Maio. 2021. doi: http://doi.org/10.1016/j.conbuildmat.2021.122691. https://doi.org/10.1016/j.conbuildmat.20...
] |
3 |
YUN et al. [69[69] YUN, C.M., RAHMAN, M.R., PHING, C.Y.W., et al., “The curing times effect on the strength of ground granulated blast furnace slag (GGBFS) mortar”, Construction & Building Materials, v. 260, pp. 120622, Nov. 2020. doi: http://doi.org/10.1016/j.conbuildmat.2020.120622. https://doi.org/10.1016/j.conbuildmat.20...
] |
3 |
CHEBOUB et al. [70[70] CHEBOUB, T., SENHADJI, Y., KHELAFI, H., et al., “Investigation of the engineering properties of environmentally-friendly self-compacting lightweight mortar containing olive kernel shells as aggregate”, Journal of Cleaner Production, v. 249, pp. 119406, Mar. 2020. doi: http://doi.org/10.1016/j.jclepro.2019.119406. https://doi.org/10.1016/j.jclepro.2019.1...
] |
5 |
HUANG et al. [71[71] HUANG, Q., ZHU, X., XIONG, G., et al., “Recycling of crushed waste clay brick as aggregates in cement mortars: an approach from macro- and micro-scale investigation”, Construction & Building Materials, v. 274, pp. 122068, Mar. 2021. doi: http://doi.org/10.1016/j.conbuildmat.2020.122068. https://doi.org/10.1016/j.conbuildmat.20...
] |
9 |
FERREIRA et al. [72[72] FERREIRA, R.L., ANJOS, M.A., MAIA, C., et al., “Long-term analysis of the physical properties of the mixed recycled aggregate and their effect on the properties of mortars”, Construction & Building Materials, v. 274, pp. 121796, 2021.] |
9 |
|
|