In this study, the potential use of residues of peanut husks was verified, in order to add value to these materials through the manufacture of panels of particleboards. For this procedure, it was used urea-formaldehyde resin and the panels were mechanical pressed at a temperature of 100 ºC. The quality of the panels was evaluated based on the prescriptions of the normative document ASTM D 1037:2006, through physical and mechanical tests of characteristics, such as: density, swelling in thickness, water absorption and static bending. The panels evaluated showed bulk density varying between 0,69 a 0,83 g cm-3, MOR and MOE between 4,37 - 5,34 MPa and 590 - 700 MPa respectively, for panels with and without preservative treatment. It is possible to claim, based in the normative document ANSI A208.1:1993, that the material presents a potential for use in internal areas as superficial covering of residential buildings, agricultural buildings, furniture and decorative sectors. Intervention in the board production process is recommended, in order to improve the mechanical properties of the material and enable its structural use.
Agriculture waste; Particleboard; Peanut husks
