Metallurgical Characterization of a Weld Bead Coating Applied by the PTA Process on the D2 Tool Steel

Caracterização Metalúrgica de um Revestimento de Cordão de Solda Aplicado pelo Processo de PTA no Aço Ferramenta D2

Abstract

In this investigation, a nickel-base powder mixed with tungsten carbide particles was applied by Plasma Transferred Arc welding (PTA) on the surface of the D2 cold work tool steel to improve surface quality and to extend its lifetime during applications. The Design of Experiment (DoE) method was applied to obtain the appropriate combination of hardfacing parameters and to run the minimum number of tests. Current, travel speed and preheat were considered as variable parameters. These parameters are important to reach a final layer with an appropriate bead geometry accompanied with good metallurgical properties. All samples were prepared for metallurgical investigations and the effect of process parameters on the weld bead geometry was considered. For each experiment run, weld bead geometry parameters were measured including dilution, penetration and reinforcement. Microstructures and the distribution of tungsten carbide particles after welding were analyzed by Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) equipped with an EDS microprobe. In addition, hardness tests were performed to evaluate the mechanical properties of the weld bead layers. Finally, among all the experiments, the best sample with appropriate bead geometry and microstructure was selected.

Key-words
Design of Experiment (DoE); Hardfacing; Nickel-base powder; PTA process; Tool steel