Acessibilidade / Reportar erro

Finite Element Simulation of Welding Distortion in Dissimilar Joint by Inherent Deformation Method

Abstract

Fusion welding is widely used to join different parts to each other in various industries. However, welding-induced distortions sometimes cause problems such as misalignment during assembling and impose costs for their removal. Thus, it is imperative to predict and mitigate these problems to improve weldment quality and also reduce fabrication costs. In this study, a dissimilar welded structure was first simulated with 3D solid and shell elements in ANSYS finite element software, and welding-induced deformations were then calculated. Afterwards, the constructed weldment was simulated using an inherent deformation method, and its results were compared with experimental measurements and 3D answers. This comparison showed that it was possible to simulate a dissimilar welded joint using an inherent deformation method in order to reduce the time and cost of modeling even at the expense of a small error.

Key-words
FEM simulation; Inherent deformation; Dissimilar joint; Solid element; Shell element

Associação Brasileira de Soldagem Rua Dr Guilherme Bannitz, 126 conj 42, 04532-060 - São Paulo/SP Brasil, Tel.: (55 11) 3045 5040, Fax: (55 11) 3045 8578 - São Paulo - SP - Brazil
E-mail: abs@abs-soldagem.org.br