Limit between stages I and II of a seed imbibition curve

Limite entre as fases I e II de um modelo de embebição de sementes

Abstracts

A knowledge of the imbibition stages shown by different species, is essential in research projects aiming at improvement of seed quality by treatments such as osmotic conditioning, initial wetting, and the use of bioregulators. The objective of this study was to establish a methodology to determine the limit between the first and second stages of the process, considering the model W = f(t) - (a - w0)exp(-kt), using statistical tests. This limit was determined using an asymptotic distribution of an estimator function. The data point beyond which the difference (W*) is no longer significant was determined using Student's T statistics. The model is <img border=0 id="_x0000_i1026" src="../../../img/revistas/sa/v61n1/a03img01.gif" align=absmiddle > or = (0.434 + 0.00162 t) - (0.434 - w o)exp(-0.121 t), with r² = 0.98 and W* = (0.434 - w o)exp(-0.121 t) fits the utilized data. The calculated t value (27.2 hours) is smaller than the value that was determined considering a 1% value difference between the asymptote and the estimated model as a criterion for the stage change. This two-hour difference corresponds to 0.28% in absorbed water.

water absorption; non-linear regression; germination

O conhecimento das fases de absorção de água das diferentes espécies é importante em pesquisas objetivando melhorar a qualidade das sementes, utilizando tratamentos como condicionamento osmótico, pré-hidratação e uso de bioreguladores. O objetivo do presente trabalho foi estabelecer uma metodologia para determinar o limite entre a primeira e a segunda fase do processo, considerando o modelo W = f(t) - (a - w0)exp(-kt), utilizando testes estatísticos. O limite entre as duas primeiras fases do processo de absorção de água pelas sementes, foi determinado utilizando-se a distribuição assintótica de uma função de estimadores. O ponto a partir do qual esta diferença (W*) deixa de ser significativa foi determinado utilizando-se o teste estatístico T de Student. Para os dados utilizados como exemplo, tem-se o modelo <img border=0 id="_x0000_i1028" src="../../../img/revistas/sa/v61n1/a03img01.gif" align=absmiddle > ou = (0,434 + 0,00162 t) - (0,434 - w o)exp(-0,121 t), com r² = 0,98 e W* = (0,434 - w o) exp(-0,121 t). O valor de t encontrado (27,2 horas) é menor do que o valor determinado, considerando-se como critério para mudança de fase a diferença de 1% entre a assíntota e o valor estimado pelo modelo ajustado. Essa diferença de duas horas corresponde a 0,28% de água absorvida.

absorção de água; regressão não-linear; germinação

CROP SCIENCE

Limit between stages I and II of a seed imbibition curve

Limite entre as fases I e II de um modelo de embebição de sementes

Sheila Zambello de PinhoI^*; Lídia Raquel de Carvalho^I; Maria Elena Aparecida Delachiave^II

^IUNESP/IBB - Depto. de Bioestatística, C.P. 510 - 18618-000 - Botucatu, SP - Brasil

^IIUNESP/IBB - Depto. de Botânica

ABSTRACT

A knowledge of the imbibition stages shown by different species, is essential in research projects aiming at improvement of seed quality by treatments such as osmotic conditioning, initial wetting, and the use of bioregulators. The objective of this study was to establish a methodology to determine the limit between the first and second stages of the process, considering the model W = f(t) – (a – w₀)exp(-kt), using statistical tests. This limit was determined using an asymptotic distribution of an estimator function. The data point beyond which the difference (W*) is no longer significant was determined using Student's T statistics. The model is = (0.434 + 0.00162 t) – (0.434 – w_o)exp(-0.121 t), with r² = 0.98 and W* = (0.434 – w_o)exp(-0.121 t) fits the utilized data. The calculated t value (27.2 hours) is smaller than the value that was determined considering a 1% value difference between the asymptote and the estimated model as a criterion for the stage change. This two-hour difference corresponds to 0.28% in absorbed water.

Key words: water absorption, non-linear regression, germination

RESUMO

O conhecimento das fases de absorção de água das diferentes espécies é importante em pesquisas objetivando melhorar a qualidade das sementes, utilizando tratamentos como condicionamento osmótico, pré-hidratação e uso de bioreguladores. O objetivo do presente trabalho foi estabelecer uma metodologia para determinar o limite entre a primeira e a segunda fase do processo, considerando o modelo W = f(t) – (a – w₀)exp(-kt), utilizando testes estatísticos. O limite entre as duas primeiras fases do processo de absorção de água pelas sementes, foi determinado utilizando-se a distribuição assintótica de uma função de estimadores. O ponto a partir do qual esta diferença (W*) deixa de ser significativa foi determinado utilizando-se o teste estatístico T de Student. Para os dados utilizados como exemplo, tem-se o modelo = (0,434 + 0,00162 t) – (0,434 – w_o)exp(-0,121 t), com r² = 0,98 e W* = (0,434 – w_o) exp(-0,121 t). O valor de t encontrado (27,2 horas) é menor do que o valor determinado, considerando-se como critério para mudança de fase a diferença de 1% entre a assíntota e o valor estimado pelo modelo ajustado. Essa diferença de duas horas corresponde a 0,28% de água absorvida.

Palavras-chave: absorção de água, regressão não-linear, germinação

INTRODUCTION

Seed germination can be defined as a series of metabolic and morphogenetic processes, which result in the transformation of the embryo into a seedling capable of becoming an adult plant. Sequential and synchronized processes occur during germination, and are organized in such a way that the anabolic and catabolic processes take place simultaneously (Coll et al., 1995).

Seeds with a permeable integument exhibit a three-stage water absorption process (Bradford, 1995), consisting of imbibition (stage I), activation or germination sensu stricto (stage II), and growth (stage III). Stage II is sensitive to factors that influence germination time and amplitude, when the water content in the seed gradually increases or remains unchanged, and then suddenly increases as the emerging radicle starts to grow; this stage ends as growth begins (Bewley & Black, 1978).

The duration of each stage (Bewley & Black, 1994) depends on properties inherent to the seeds, such as the level of hydratable substrates, integument permeability, seed size, and oxygen absorption. It also depends on the hydration conditions, such as temperature, moisture level, and substrate composition.

The rapid initial absorption is a consequence of the water potential difference between the seed and the substrate, which is caused by the high matrix potential of the seed. This water movement always occurs spontaneously, according to a decreasing water potential gradient (Villela et al., 1991), and is qualitatively the same in either viable or non-viable seeds (Bewley & Black, 1994).

Seed imbibition studies have shown the influence exercised by species, seed age, and the environment conditions on the establishment of a model that would properly represent this process until the initial germination stage. Most reports present models that represent the first two stages, as in Blacklow (1972), Hadas & Russo (1974), Bruckler (1983), Leopold (1983), Bouaziz & Bruckler (1989), Studdert et al. (1994), and Lopes et al. (1996; 2000). Delachiave & Pinho (2001), Almeida & Delachiave (2001), and Braga et al. (2001) presented models that represented the three stages of the process for Senna occidentalis, Leonorus sibiricus, and Pachyrhizus ahipa seeds, respectively.

Blacklow (1972), working with maize (Zea mays L.), and Studdert et al. (1994), working with wheat (Triticum aestivum L.), described the first two stages of the water absorption process by the equation W = f(t) – (a – w₀)exp(-kt), where W is the amount of seed water based on its dry weight; f(t) = a + bt is the asymptote of the exponential curve in which a is the asymptote value at time t = 0 and b is the linear slope; and w₀ is the initial amount of seed water.

The k parameter is related to seed permeability to water, a relates to the seed initial water capacity, and b relates to the rate of change in the seed water capacity during the imbibition process. Blacklow (1972) proposed to consider as the end of the first stage, the time necessary for the difference between the asymptote and the value estimated by the model to be equal to 1%. This proposition was also utilized by Studdert et al. (1994).

In research studies aimed at improving seed quality with the use of treatments such as osmotic conditioning, initial wetting and the use of bioregulators, it is important to obtain a knowledge of the water absorption stages for different species. Therefore, the objective of this work was to establish a methodology to determine the limit between the first and second stages of the process, considering the model presented by Blacklow (1972), with the use of statistical tests.

MATERIAL AND METHODS

To illustrate the methodology and the deducted formulas, one of the models presented by Studdert et al. (1994) was utilized. The seed imbibition data were generated according to the function W = (0.44 + 0.0017t) – (0.44 – 0.09)exp(-0.109t), considering the time interval from zero to 100 hours, at every five hours.

The limit between the first two stages of the process of water absorption by the seeds, based on the model W = f(t) – (a – w₀)exp(-kt), was determined using the asymptotic distribution of an estimator function, as described in Hoffmann & Vieira (1983).

Considering a, b and c as unbiased estimators of a, b and g, respectively, with V(a), V(b) and V(c) their variances and d = f (a,b,c) a function of first- and second-order continuous derivatives in a vicinity of a = a, b = b and c = g, it can be demonstrated that d = f (a,b,c) is a consistent estimator of D = f(a, b, g), with an asymptotically normal distribution of variance

where

Hoffmann & Vieira (1983) presented a procedure for the determination of the matrix of variances and covariances of the parameters and their estimates, based on the likelihood function.

RESULTS AND DISCUSSION

Let us consider the equation W = (a + bt) – (a – w_o) exp(-gt), where W is the seed water content at time t; (a + bt) is the asymptote of the exponential curve with a equal to the asymptote value at time t = 0 and b is its slope, representing the change in water absorption capacity during the seed imbibition process; w_o is the water content at time t = 0 and g is the constant rate related to seed permeability to water. Parameters a, b and g can be estimated by methods found in the literature, such as the Marquardt - Levenberg method cited in Seber & Wild (1988), and will be represented by a, b and c respectively. Thus,

The difference between the asymptote and the fitted model, represented by W*, is given by

The point beyond which this difference is no longer significant is determined by Student's T statistics, at a selected significance level.

The variance estimate of the difference between the asymptote and the model can be determined by applying equation (1) into (2), and obtaining the expression:

Substituting in (3) the (W*) expression given by (4), and the W* expression, given by (2), we obtain

By solving this second-degree equation for t, we have

Calculating t involves determinations of the variance and covariance estimates of the parameter estimates involved in the expression of the difference between the asymptote and the fitted model. These estimates are obtained in the process of model fitting. Thus, let us consider the statistical model

and admit that a sample of n values for t_i and W_i is given. If the u_i values are independent random variables normally-distributed with mean equal to zero and variance s², the likelihood function of the sample is:

The maximum likelihood estimates (a,b,c and s²) are the values of a, b, g and s² that maximize L, and therefore maximize lnL.

The symmetrical information matrix Dpxp has its elements defined by

By applying the assumptions E(u_i) = 0 and E(u_i²) = s², we obtain the matrix D

The estimate of the matrix of asymptotic variances and covariances for a,b and c is:

where s² is the residual mean square obtained in the analysis of variance for the model.

For the data generated with the model proposed by Studdert et al. (1994), we obtain = (0.434 + 0.00162 t) – (0.434 – w_o) exp(-0.121 t), with r² = 0.98, W* = (0.434 – w_o) exp(-0.121 t) and

Substituting the values in expression (5) we get

Therefore, t = 27.2 hours with W* = 1.28%.

The t value found is smaller than the determined value (29.2 hours), considering as a criterion for the stage change the 1% difference between the asymptote and the value estimated by the fitted model, as established by Blacklow (1972). This 2-hour difference corresponds to 0.28% in absorbed water.

Received December 05, 2002

Accepted October 23, 2003

References

• ALMEIDA, L.F.R.; DELACHIAVE, M.E.A. Aspectos da germinação de sementes de rubim (Leonorus sibiricus L.). Botucatu: UNESP/IB, 2001. 36p.(Monografia Graduação).
• BEWLEY, J.D.; BLACK, M. Physiology and biochemistry of seeds New York: Springer Verlag, 1978. v.1, 306p.
• BEWLEY, J.D.; BLACK, M. Physiology of development and germination New York : Plenum Press, 1994. 445p.
• BLACKLOW, W. M. Mathematical description of the influence of temperature and seed quality on the imbibition by seeds of corn (Zea mays L.) Crop Science, v.12, p.643-646, 1972.
• BOUAZIZ, A.; BRUCKLER, L. Modeling of wheat imbibition and germination as influenced by soil physical properties. Soil Science Society America Journal, v.53, p.219-227, 1989.
• BRADFORD, K.J. Water relations in seed germination. In: KIGEL, J.; GALILI, G. Seed development and germination New York: Marcel Dekker, 1995. p.351-396.
• BRAGA, L.F.; SOUSA, M.P.; POLETTO, R.S.; DELACHIAVE, M.E.A.; PINHO, S.Z. Curva de embebição de sementes de Pachyrhizus ahipa (WEDD.) PARODI. In: WORKSHOP DE PLANTAS MEDICINAIS DE BOTUCATU, 5., Botucatu, 2001. Anais Botucatu: FCA,IBB,FMB, 2001. p.117.
• BRUCKLER, L. Rôle des propriétés physiques du lit de semnces sur l'imbibition et la germization: I. Elaboration d'un modèle du système "terre-graine". Agronomie, v.3, p.213-222, 1983.
• COLL, J.B.; RODRIGO, G.N.; GARCIA, B.S.; TAMÉS, R.S. Fisiología vegetal Madrid: Ediciones Pirámide, 1995. 662p.
• DELACHIAVE, M.E.A.; PINHO, S.Z. Curvas de embebição de sementes de Senna occidentalis Link., em diferentes potenciais osmóticos. In: CONGRESSO BRASILEIRO DE FISIOLOGIA VEGETAL, 8., Ilhéus, 2001. Resumos Ilhéus: Sociedade Brasileira de Fisiologia Vegetal, 2001. p.35.
• HADAS, A.; RUSSO, D. Water uptake by seeds as affected by water stress, capillary conductivity and seed-soil water contact: I. Experimental study. Agronomy Journal, v.66, p.643-47, 1974.
• HOFFMANN, R.; VIEIRA, S. Análise de regressão: uma introdução à econometria. 2.ed. São Paulo: Editora Hucitec, 1983. 379p.
• LEOPOLD, A.C. Volumetric components of seed imbibition. Plant Physiology, v.73, p.677-680, 1983.
• LOPES, H.M.; MARIA, J.; SILVA, R.F. da; MALAVAS, M.M. Influência do potencial osmótico e da temperatura na embebição e no crescimento da radícula de sementes de cebola (Allium cepa L.) Revista Brasileira de Sementes, v.18, p.167-172, 1996.
• LOPES, H.M.; ROSSETTO, C.A.V.; CARNEIRO, V. Embebição de sementes de cenoura (Daucus carota L.) em diferentes potenciais osmóticos por dois métodos. Revista Brasileira de Sementes, v.22, p.81-87, 2000.
• SEBER, G.A.F.; WILD, C.J. Nonlinear regression New York: John Wiley & Sons, 1988. 768p.
• STUDDERT, G.A.; WILHELM, W.W.; POWER, J.F. Imbibition response of winter to water-filled pore space. Agronomy Journal, v.86, p.995-1000. 1994.
• VILLELA, F.A.; DONI FILHO, L.; SEQUEIRA, L.E. Tabela de potencial osmótico em função da concentração de polietileno glicol 6000 e da temperatura. Pesquisa Agropecuária Brasileira, v.26, p.1957-1968, 1991.

Publication Dates

• Publication in this collection
  16 Feb 2004
• Date of issue
  Feb 2004

History

• Received
  05 Dec 2002
• Accepted
  23 Oct 2003