Matéria (Rio de Janeiro)

Publicación de: Laboratório de Hidrogênio, Coppe - Universidade Federal do Rio de Janeiro, em cooperação com a Associação Brasileira do Hidrogênio, ABH2
Área: Engenharias

Versión on-line ISSN: 1517-7076

launch Envío de manuscritos info Acerca de la revista article Política Editorial people Cuerpo Editorial help_outline Instrucciones a los autores markunread Contacto

home Página de inicio

Todos los números « Número anterior Número siguiente » Número actual

Buscar show_chart Métricas

home Todos Buscar Métricas

navigate_before navigate_next Actual

Nuestra misión

Divulgar el área de Ciencia e Ingeniería de Materiales y Materiales para Energía a través de la publicación de artículos científicos sobre temas variados de estas áreas del conocimiento para facilitar el intercambio y el trabajo conjunto de científicos, profesionales y estudiantes.

Número más reciente

Matéria (Rio de Janeiro), Volumen: 31, Publicado: 2026

Artículos más recientes

Volumen: 31 - Publicado em: 2026-08-07

Phase-field modeling of interfacial effects on corrosion-induced damage in confined reinforced concrete structures

Volumen: 31 - Publicado em: 2026-08-07

Developing sbs/cr modified blended asphalt to address climatic challenges in xinjiang, china

Volumen: 31 - Publicado em: 2026-08-07

Development of sustainable controlled low-strength backfill materials using eco-friendly binders

Volumen: 31 - Publicado em: 2026-08-07

An experimental study on prediction of residual strength of steel rods by electrical resistivity technique

Volumen: 31 - Publicado em: 2026-08-03

Analysis of the potential impacts of hydrogen on the energy transition in brazil and paraguay

Volumen: 31 - Publicado em: 2026-08-03

Study on preparation of dispersed co-polymer micro-particle gels for deep profile control in bohai bay offshore oilfield

Volumen: 31 - Publicado em: 2026-08-03

Pareto–edgeworth–grierson (peg), preference selection index (psi) and curli method in multi criteria decision making for turning process parameters optimization

Volumen: 31 - Publicado em: 2026-08-03

Experimental investigation on chloride penetration and mechanical characteristics in early age cement-based materials under salt freeze-thaw conditions

Volumen: 31 - Publicado em: 2026-08-03

Experimental investigation of reinforced cement concrete and nylon fiber reinforced concrete beam

Volumen: 31 - Publicado em: 2026-07-31

X-ray diffraction pattern analysis assisted by convolutional neural networks

Volumen: 31 - Publicado em: 2026-07-27

Mechanical and thermal behavior of cement mortars incorporating fines from ornamental stone

Volumen: 31 - Publicado em: 2026-07-27

Formation and migration energies of vacancies at the cu/ta interface

Volumen: 31 - Publicado em: 2026-07-27

Machine learning-enabled energy management strategies for hybrid renewable-powered ultra-fast charging infrastructure

Volumen: 31 - Publicado em: 2026-07-24

In situ generated sicw-zro2 collaborative enhancing al2o3-based composites and their mechanical properties

Volumen: 31 - Publicado em: 2026-07-24

Machine learning-driven prediction of compressive strength in sustainable geopolymer concrete using artificial neural network and random forest models

Volumen: 31 - Publicado em: 2026-07-24

Characterization studies and mechanical properties on solution treated and aged aa8079 composites with influences of tib2 particles

Volumen: 31 - Publicado em: 2026-07-20

Preparation of polyacrylonitrile mixed matrix ultrafiltration membranes doped with aminated mil-125(ti) and evaluation of their anti-fouling performance in oil-water separation

Volumen: 31 - Publicado em: 2026-07-20

Effect of different ellipticities on the local stress distribution of film cooling holes in nickel-based single crystal thin-walled specimens

Volumen: 31 - Publicado em: 2026-07-20

Performance enhancement of a floating polycrystalline pv system using random forest-based mppt

Volumen: 31 - Publicado em: 2026-07-20

Mechanical performance optimization of concrete incorporating crushed brick aggregates and manufactured sand using response surface methodology

Volumen: 31 - Publicado em: 2026-07-20

Analysis of the microstructural behavior of the al4.5cu5zn semisolid alloy during partial remelting

Volumen: 31 - Publicado em: 2026-07-17

Evaluation of the mechanical, thermal, and morphological properties of pp and abs composites reinforced with sugarcane fiber

Volumen: 31 - Publicado em: 2026-07-20

Bio-based lubrication strategies for polyamide tribosystems: quantified cof and wear reductions using mos2-filled pa66

Volumen: 31 - Publicado em: 2026-07-17

Novel multi-criteria aero-structural framework for sustainable uav wings using pla and epoxy biocomposites

Volumen: 31 - Publicado em: 2026-07-17

Optical emission and photoluminescence studies of eu3+: ypo4 phosphors synthesized via solvothermal method

Volumen: 31 - Publicado em: 2026-07-17

Fracture, resiliency, and feasibility analysis of cement concrete with lathe steel scrap for paving applications in transportation technology

Volumen: 31 - Publicado em: 2026-07-17

Impact of salt crystal on heat retention in trapezoidal salt gradient solar ponds – an experimental investigation

Volumen: 31 - Publicado em: 2026-07-17

Deep learning neural network–based prediction of abrasive water jet machining performance and surface roughness of dmr249a steel

Volumen: 31 - Publicado em: 2026-07-17

Structural performance of novel precast column-foundation connections: an experimental investigation

Volumen: 31 - Publicado em: 2026-07-17

Optimizing concrete performance through fine aggregate selection: experimental study and desirability-based modeling

Volumen: 31 - Publicado em: 2026-07-06

Design and analysis of laminated composite fuselage to maximize fundamental frequency using finite element analysis and artificial neural networks

Volumen: 31 - Publicado em: 2026-07-06

Microstructural and mechanical characterization of gas tungsten arc welded 316l stainless steel joints: effects of ni cr w/b coated fillers

Volumen: 31 - Publicado em: 2026-07-06

Avaliação da influência do tio2 em argamassa de revestimento à base de cimento branco e da capacidade de autolimpeza

Volumen: 31 - Publicado em: 2026-07-06

Optimization and assessment of concrete performance using ceramic waste and polypropylene fibers

Volumen: 31 - Publicado em: 2026-07-17

Mathematical modeling and computational simulation of a floating solar still

Volumen: 31 - Publicado em: 2026-07-06

Evaluation of calcium (ca) and magnesium (mg) impregnated municipal solid waste (msw) bottom ash for fluoride adsorption

Volumen: 31 - Publicado em: 2026-07-06

Structural capacity analysis of a vertical connection module using an isotropic hardening model under external loading

Volumen: 31 - Publicado em: 2026-07-06

Study on prediction of ground surface settlement results in shield tunnel passing through fault zones

Volumen: 31 - Publicado em: 2026-07-10

Experimental and analytical investigation of steel fibre-reinforced beam-column connections

Volumen: 31 - Publicado em: 2026-07-10

Construction of chitosan-sodium alginate core-shell microcapsules and their dual-functional application in tobacco mildew prevention and flavor preservation

Volumen: 31 - Publicado em: 2026-07-10

One-shot multi-material polyjet 3d printing of soft pneumatic actuators with integrated endoskeleton structure for enhanced performance

Volumen: 31 - Publicado em: 2026-07-06

Diafragma metálico em tanques de propelente líquido para controle de atitude de veículos espaciais e satélites

Volumen: 31 - Publicado em: 2026-07-03

Numerical study of headed bars in exterior rc beam column joint wrapped with gfrp under cyclic loading

Volumen: 31 - Publicado em: 2026-07-03

Synergistic effects of açaí seed ash and thermal processing on the physico-mechanical properties of ceramic blocks

Volumen: 31 - Publicado em: 2026-07-03

Synthesis, characterization, and electrochemical performance of nickel(ii) oxide, cobalt(iii) oxide, and spinel nickel cobaltite for high-performance asymmetric supercapacitors

Volumen: 31 - Publicado em: 2026-06-29

Performance evaluation of nano-silica and calcined nano-clay modified cement mortar

Volumen: 31 - Publicado em: 2026-06-29

Predictive evaluation of tryout parameters in thermoplastic injection molding using decision tree

Volumen: 31 - Publicado em: 2026-06-26

Impact and ballistic performance of hybrid ramie fabric and sic particle-reinforced epoxy matrix composites

Volumen: 31 - Publicado em: 2026-06-26

Quantifying the compressive strength of basalt fiber reinforced concrete using advanced hybrid machine learning models

Volumen: 31 - Publicado em: 2026-06-22

Sustainable concrete performance prediction using machine learning for mechanical and durability properties with construction and demolition waste

Volumen: 31 - Publicado em: 2026-06-22

A nano-coated copper–chromium exhaust silencer for emission mitigation and efficiency improvement in single-cylinder diesel engines

Volumen: 31 - Publicado em: 2026-06-22

Sustainable plastic bricks for improved thermal resistance and carbon dioxide uptake

Volumen: 31 - Publicado em: 2026-06-19

Validation of the determination of chemical oxygen demand through uv-vis

Volumen: 31 - Publicado em: 2026-06-19

Evaluation of the effect of graphene addition in fluoroelastomer composites

Volumen: 31 - Publicado em: 2026-06-19

Enhanced structural health monitoring using symbolic aggregate approximation with hybrid deep learning models

Volumen: 31 - Publicado em: 2026-06-19

Enhanced energy management system (ems) and motor health monitoring for electric vehicles: a machine learning approach

Volumen: 31 - Publicado em: 2026-06-19

Sustainable aluminium milling: evaluating lubrication strategies and environmental impact

Volumen: 31 - Publicado em: 2026-06-22

Synthesis of calcium phosphates from calcium hydroxide and phosphoric acid in presence of lactic acid

Volumen: 31 - Publicado em: 2026-06-19

Effect of rolling and tempering process on microstructure and mechanical properties along the thickness direction of hsla steel plate

Volumen: 31 - Publicado em: 2026-06-15

Inorganic oxide nanoparticles synthesized from aceh bovine bone through sol–gel method: effect of precipitation agents on the physicochemical properties and its catalytic activities in transesterification palm oil into biodiesel

Volumen: 31 - Publicado em: 2026-06-15

Flexural performance of 3d-printed onyx–kevlar hybrid laminates: influence of fibre orientation and laminate thickness

Volumen: 31 - Publicado em: 2026-06-12

Mechanical strength, tribological performance, and waste control in filler-modified glass fiber–reinforced epoxy composites

Volumen: 31 - Publicado em: 2026-06-05

Microstructure and properties of laser-cladding inconel 625-based wc/tic gradient composite coat-ings on 65mn steel

Volumen: 31 - Publicado em: 2026-06-12

Fabrication of graphene/tio2 nanocomposites: structural characterization and enhanced ozone detection performance

Volumen: 31 - Publicado em: 2026-06-05

Durability performance of nano-silica modified fly ash concrete under accelerated co2 carbonation conditions

Volumen: 31 - Publicado em: 2026-06-05

Flexural behaviour of the fibre-reinforced concrete beams with utilization of e-waste: experimental and analytical study

Volumen: 31 - Publicado em: 2026-06-05

Flexibility analysis and process parameter optimization of tpu materials printed by fdm

Volumen: 31 - Publicado em: 2026-06-05

Influence of lubricants on extrusion force and tribological response in cold forward microextrusion of al6063

Volumen: 31 - Publicado em: 2026-06-05

3d evaluation of the use of steel slag in road layers as a sustainable soil improvement method

Volumen: 31 - Publicado em: 2026-06-05

Mechanical, thermal, and environmental performance of ipomoea carnea and tecoma stans fiber-reinforced biophenolic hybrid composites

Volumen: 31 - Publicado em: 2026-06-05

Improve the behavioural properties of concrete using nano-silica and graphene oxide nanocomposites

Volumen: 31 - Publicado em: 2026-06-05

Estudo de um compósito particulado de matriz polimérica com endocarpo do cocos nucifera linn. fabricado por extrusão

Volumen: 31 - Publicado em: 2026-06-01

Análise do desempenho de concretos produzidos com agregado miúdo residual proveniente de mineração performance analysis of concrete produced with residual fine aggregate from mining

Volumen: 31 - Publicado em: 2026-05-29

The use of fractal dimension among the descriptive characteristics of different types of natural fine aggregate for construction in arid environments

Volumen: 31 - Publicado em: 2026-05-29

Desempenho térmico e mecânico de argamassas leves produzidas com eps residual e hidroxipropilmetilcelulose

Volumen: 31 - Publicado em: 2026-05-29

Development of eco-friendly nano-catalysts using plant-derived silver nanoparticles for environmental wastewater treatment and remediation

Volumen: 31 - Publicado em: 2026-05-29

Enhancing mechanical, thermal, and flame-retardant properties of polyester/flax composites with magnesium and calcium hydroxide nanoparticles

Volumen: 31 - Publicado em: 2026-05-29

Supervised machine learning driven analysis of compressive strength in concrete incorporating sustainable sludge with shap and pdp analyses

Volumen: 31 - Publicado em: 2026-05-25

Análise da região adesiva em madeira lamelada colada de lyptus por diferentes técnicas de microscopia analysis of the adhesive region in glued laminated lyptus wood using different microscopy techniques

Volumen: 31 - Publicado em: 2026-05-25

Desempenho de uma stack fuel cell pem acoplada diretamente a um inversor solar híbrido off-grid para sistemas de backup

Volumen: 31 - Publicado em: 2026-05-25

Textile dye removal efficiency by leucaena-derived biochar and black liquor

Volumen: 31 - Publicado em: 2026-05-25

Assessment of polymer fibers on mechanical behavior and high-temperature performance of gfrp-reinforced beams

Volumen: 31 - Publicado em: 2026-05-25

Sustainable synthesis of sodium silicate from agro waste ashes for green construction applications

Volumen: 31 - Publicado em: 2026-05-25

Performance and thermal resilience of tin-coated steel in dry sliding: an energy-based analysis

Volumen: 31 - Publicado em: 2026-05-22

Valorization of ornamental stone waste in adhesive mortars: mechanical and microstructural insights

Volumen: 31 - Publicado em: 2026-05-22

Integrating nano-silica and silica fume to enhance the mechanical properties of leca-based lightweight concrete

Volumen: 31 - Publicado em: 2026-05-18

The influence of thermomechanical processing on the corrosion behaviour and hardness of p91 and 304 stainless steel bimetallic component

Volumen: 31 - Publicado em: 2026-05-18

An optimized neuro-fuzzy control approach for ph neutralization in industrial wastewater treatment systems

Volumen: 31 - Publicado em: 2026-05-18

Hierarchical pore refinement and synergistic hydration: reinforcement mechanism of concrete modified with a composite of xypex and nano-calcium carbonate

Volumen: 31 - Publicado em: 2026-05-18

Zif-67-derived co3o4/n-doped carbon nanocomposites for sensitive electrochemical determination of nitrite in water

Volumen: 31 - Publicado em: 2026-05-15

Potassium-rich calcinated waste coffee husk ash as an alkali activator in one-part geopolymer concrete

Volumen: 31 - Publicado em: 2026-05-15

Hydroxyapatite/zinc oxide functionalized with folic acid as a curcumin carrier for cancer treatment

Volumen: 31 - Publicado em: 2026-05-15

Analysis of guide vane compatibility after runner replacement based on cfd

Volumen: 31 - Publicado em: 2026-05-11

Characterization of traditional masonry and timber materials in shanxi dwellings using digital heritage tools

Volumen: 31 - Publicado em: 2026-05-11

Study on recycling rate evaluation and multi-factor influence of reclaimed asphalt based on mixing-separation and performance characterization

Volumen: 31 - Publicado em: 2026-05-15

Formulation of empirical models for multi-objective optimization of parameters during friction stir welding of az80amg alloy for improving tensile strength and impact toughness

Volumen: 31 - Publicado em: 2026-05-15

Asse-free si–te–ge chalcogenide glass ots selectors designed by interpretable machine learning

Volumen: 31 - Publicado em: 2026-05-15

Análise comparativa das propriedades químicas, térmicas e físico-mecânicas de três espécies de madeira

Volumen: 31 - Publicado em: 2026-05-08

Machine learning-enabled prediction of structural response in cfrp-wrapped steel–concrete hybrid composites

Volumen: 31 - Publicado em: 2026-05-08

Mechanical, morphological and thermal analysis of biochar-filled polymer bio-composites

Volumen: 31 - Publicado em: 2026-05-08

Estudo das argamassas históricas nas ruínas da igreja de santa rita de cássia, pedro velho/rn – brasil

Volumen: 31 - Publicado em: 2026-05-01

Comprehensive surface quality analysis of material extrusion printed parts based on an integrated pb-bbd-gra approach

Volumen: 31 - Publicado em: 2026-05-01

Predicting compressive strength of ultra-high-performance concrete using ensemble machine learning models with shap and pdp interpretations

Volumen: 31 - Publicado em: 2026-04-27

Expanding the scope of the lodeci method for criteria weight determination

Volumen: 31 - Publicado em: 2026-04-27

Evaluating reality capture technologies for structural joint verification in prefabricated concrete assemblies

Volumen: 31 - Publicado em: 2026-04-27

Process optimization of camel dung-derived biogas upgrading through ionic liquid–incorporated polyethersulfone membranes

Volumen: 31 - Publicado em: 2026-05-01

Influence of the shear key on the mechanical performance of beam-column connections in precast concrete structures

Volumen: 31 - Publicado em: 2026-05-01

Feasibility of synthetic and natural hybrid composites for applications in civil construction

Volumen: 31 - Publicado em: 2026-05-01

A preliminary experimental investigation on multi-recycled asphalt pavement in finland

Volumen: 31 - Publicado em: 2026-04-27

Evaluating the influence of plant-based and synthetic fibers on freeze-thaw resistance in cementitious composites

Volumen: 31 - Publicado em: 2026-05-01

Ductility improvement in sustainable rc beams using cupola and copper slag: experimental analysis and fea validation

Volumen: 31 - Publicado em: 2026-04-27

Overview on the brazilian scenario and the first efforts towards the development of a borehole repository

Volumen: 31 - Publicado em: 2026-04-17

Painéis de resíduos madeireiros em composições termoacústicas panels from wood wastes in thermoacoustic compositions

Volumen: 31 - Publicado em: 2026-04-20

Development and characterization of a sustainable iron carbonate binder using thermally treated red mud

Volumen: 31 - Publicado em: 2026-04-10

Sustainable cementitious mortars produced with polymer waste from synthesis reactor cleaning

Volumen: 31 - Publicado em: 2026-04-10

Performance prediction of sustainable geopolymer concrete incorporating biochar and nano-cellulose using machine learning models

Volumen: 31 - Publicado em: 2026-04-10

Hybrid nano-engineered functionally graded concrete with multi-zone failure analysis for performance zoning and structural health monitoring

Volumen: 31 - Publicado em: 2026-04-10

Effect of sputter deposition parameters on the optical contrast and phase-change dynamics of ge2sb2te5 thin films for reconfigurable photonic devices

Volumen: 31 - Publicado em: 2026-03-30

Ultrasonically dispersed al–b4c composites with engineered interfaces and graphene tribofilms for high energy efficiency applications

Volumen: 31 - Publicado em: 2026-03-30

Mechanical response and damage metrics across polymer- and metal-matrix composites: cfrp and aa7065–b4c–graphite hybrid mmc

Volumen: 31 - Publicado em: 2026-03-30

Artificial neural networks approach for the prediction of the mechanical properties of high-strength fibre-reinforced concrete

Volumen: 31 - Publicado em: 2026-03-30

Mechanistic insights into the structure–void–interface–performance coupling of high-rap hot-recycled asphalt mixtures

Volumen: 31 - Publicado em: 2026-03-30

Correlation between mbn and reverse transformation of martensite by heat treatments in aisi 304

Volumen: 31 - Publicado em: 2026-03-20

Experimental investigation on mechanical, durability and microstructural behavior of alccofine and quartz sand in concrete

Volumen: 31 - Publicado em: 2026-03-16

Synthesis and characterization of cerium oxide nanoparticles by surfactant-assisted precipitation method

Volumen: 31 - Publicado em: 2026-03-16

Comparative study of shear strength parallel to grain of wood according to the methodologies of abnt nbr 7190:2022

Volumen: 31 - Publicado em: 2026-03-16

Preparation and performance study of ag/ag3po4-g-c3n4/bioi composite photocatalysts

Volumen: 31 - Publicado em: 2026-03-16

Effects of preprocessing methods on the road performance of high reclaimed asphalt pavement recycled hot-mix asphalt

Volumen: 31 - Publicado em: 2026-03-16

Tio2 nanoparticle-enhanced kevlar fiber epoxy composites: development, characterization, and performance analysis

Volumen: 31 - Publicado em: 2026-03-16

Optimizing strength and durability of concrete through ggbfs replacement and sap inclusion

Volumen: 31 - Publicado em: 2026-03-16

Development and characterization of banana leaf powder reinforced pla biocomposite films for sustainable packaging applications

Volumen: 31 - Publicado em: 2026-03-13

Defective vigna radiata waste as a functional reinforcement in polylactic acid composites for additive manufacturing

Volumen: 31 - Publicado em: 2026-03-13

Concrete reinforced with polymeric fibers: an approach by non-destructive techniques of ultrasonic pulse velocity and electrical resistivity

Volumen: 31 - Publicado em: 2026-03-09

Enhancing ferrocement performance: plastic analysis for bending strength prediction

Volumen: 31 - Publicado em: 2026-03-02

Effect of treated incinerated bottom ash on the concrete properties – investigation on the long-term mechanical properties

Volumen: 31 - Publicado em: 2026-03-02

Thermal resilience of concrete enhanced with fiber-reinforced polymer composite wraps

Volumen: 31 - Publicado em: 2026-03-02

Structural behaviour of composite bridge deck with pmc link slabs reinforced with gfrp bars

Volumen: 31 - Publicado em: 2026-03-02

Fatigue life prediction of asphalt mixtures in the brazilian indirect tension tests from the linear amplitude sweep binder data

Volumen: 31 - Publicado em: 2026-03-02

Response surface methodology-based optimization of multi-walled carbon nanotube-graphene oxide enhanced stearic acid phase change materials

Volumen: 31 - Publicado em: 2026-02-27

Effect of heat input on solidification, microhardness, and tensile properties of dissimilar aisi 316/aisi 304 mig welded joints

Volumen: 31 - Publicado em: 2026-02-27

Characterization of sisal (agave sisalana) fibers

Volumen: 31 - Publicado em: 2026-02-27

Multi criteria decision making using marcos method in optimization of al 6063 turning process parameters with different weighting methods

Volumen: 31 - Publicado em: 2026-02-23

Non-destructive evaluation of residual strength and bond performance in recycled coarse aggregate concrete with deformed bars of varying diameters and strengths

Volumen: 31 - Publicado em: 2026-02-23

Finite element modeling of stress distribution and crack behavior in gfrc beams with different reinforcement types

Volumen: 31 - Publicado em: 2026-02-23

Study of the dye sensitizing time effect on tio2/zno photoanode for solar cell

Volumen: 31 - Publicado em: 2026-02-23

Multi criteria decision making for process parametric optimization of a milling process using the marcos method and different weighing methods

Volumen: 31 - Publicado em: 2026-02-16

Performance of silica fume concrete reinforced with glass, jute, and hemp fibers under simulated acid attack

Volumen: 31 - Publicado em: 2026-02-16

Effect on ai-driven ant lion optimization framework using fibre reinforced concrete with dual-stage building crack for structural applications

Volumen: 31 - Publicado em: 2026-02-13

Effect of annealing temperature on fatigue damage evolution behavior of slm alsi10mg alloy

Volumen: 31 - Publicado em: 2026-02-13

Incinerated biomedical waste ash in concrete production: a case study on hazardous material immobilization

Volumen: 31 - Publicado em: 2026-02-09

Caracterização química e mineralógica de argamassa histórica do convento franciscano de ipojuca do século xvii: contribuições para reconstituição de traço

Volumen: 31 - Publicado em: 2026-02-02

Modeling and simulation of recrystallization in metals with spheroidal grain structures using hybrid cellular automata

Volumen: 31 - Publicado em: 2026-02-02

A neutrosophic transfer learning approach for enhanced recyclable waste identification

Volumen: 31 - Publicado em: 2026-02-02

Mechanical activation of expired portland cements: experimental characterisation

Volumen: 31 - Publicado em: 2026-02-02

Efeito do tempo e condições de estocagem em amostras produzidas por manufatura aditiva em areia sílica com resina furânica

Volumen: 31 - Publicado em: 2026-02-02

Geopolymeric mortars through acid and basic activations formulated from slate mining waste

Volumen: 31 - Publicado em: 2026-02-02

Comparative mechanical analysis of polymers made by sla, fdm, and injection

Volumen: 31 - Publicado em: 2026-02-02

Surface biomineralization with pythium aphanidermatum in cracked cement pastes: limitations and perspectives

Volumen: 31 - Publicado em: 2026-02-02

Nano-cellulose and biochar reinforced fly ash–ggbs based geopolymer concrete: a sustainable pathway to enhanced strength and durability

Volumen: 31 - Publicado em: 2026-02-02

Drug-free carboxymethyl cellulose hydrogels with extract from morinda citrifolia for enhancing antimicrobial activity

Volumen: 31 - Publicado em: 2026-02-02

Bim-driven energy performance simulation for smart and sustainable retrofitting of aging structures

Volumen: 31 - Publicado em: 2026-02-02

Study on the anti-scouring performance of a new type of cast-in-situ vegetation concrete for slope protection

Volumen: 31 - Publicado em: 2026-01-30

Enhanced mechanical and thermal properties of epoxy composites reinforced with date palm seed particles

Volumen: 31 - Publicado em: 2026-01-30

Quantitative determination of cd in single hair strands using laser ablation inductively coupled plasma mass spectrometry (la-icp-ms)

Volumen: 31 - Publicado em: 2026-01-26

Fracture toughness of basalt fiber-reinforced hot recycled asphalt mixtures: a study based on dic technology

Volumen: 31 - Publicado em: 2026-01-26

Investigation on the thermal, mechanical, and morphological characterization of peepal fiber-reinforced epoxy composites enhanced with micro-particulate ziziphus mauritiana seed powder

Volumen: 31 - Publicado em: 2026-01-30

Development of advanced sensor materials and encryption techniques for secure wireless body area networks (wbans) in healthcare applications

Volumen: 31 - Publicado em: 2026-01-23

Influence of 1% recycled pet fiber on the fracture behavior of recycled aggregate concrete beams

Volumen: 31 - Publicado em: 2026-01-19

Research on a novel citrus pectin-bentonite composite with enhanced rheological properties

Volumen: 31 - Publicado em: 2026-01-19

A novel approach and zero waste concept for making geopolymer-based bauxite residue tiles

Noticias

2026-07-24 10:00

El futuro del artículo científico en la era de la IA

El modelo actual de publicación científica se ha transformado de...

2026-07-15 14:00

Lograr una comunicación de la investigación más equitativa y eficaz: seis palancas para apoyar el intercambio de preprints [Publicado originalmente en blog de INASP en junio/2026]

Aunque la mayoría de los responsables políticos y financiadores de...

2026-05-22 11:30

La nueva versión de BrCris amplía la visibilidad y la transparencia de la investigación científica brasileña

La nueva versión del Ecosistema Brasileño de Información sobre la...

2026-05-08 10:00

A pesar de estar a hombros de gigantes, la ciencia va retrocediendo

El texto analiza la creciente percepción de un retroceso en la...

2026-04-29 15:00

¿Reiterar lo obvio? La indexación internacional aumenta el número de artículos enviados y la visibilidad de las revistas científicas

Aunque la internacionalización de las revistas publicadas en...

2026-04-24 14:00

Algo importante está sucediendo en el mundo de la ciencia y Brasil parece quedarse al margen una vez más

Los recientes avances en los agentes de inteligencia artificial...

2026-04-01 10:00

Citas “zombis” y “fantasmas” en la IA – son diferentes y cómo se originan

Dos especies distintas. Una especie son las "citas fantasma"...

2026-03-20 10:00

La linterna de Diógenes y el autoexamen del investigador: la integridad científica bajo presión

Recurriendo a la metáfora de la linterna de Diógenes, Ricardo...

2026-03-13 14:00

La sicofancia en la IA: el riesgo de la complacencia

La sicofancia es un comportamiento que presenta la inteligencia...

2026-02-27 10:00

SciELO y Crossref unen fuerzas para visibilizar la comunidad brasileña de investigación abierta el próximo marzo

Tras el gran interés de la comunidad de la región durante nuestro...

location_on

Laboratório de Hidrogênio, Coppe - Universidade Federal do Rio de Janeiro, em cooperação com a Associação Brasileira do Hidrogênio, ABH2 Av. Moniz Aragão, 207, 21941-594, Rio de Janeiro, RJ, Brasil, Tel: +55 (21) 3938-8791 - Rio de Janeiro - RJ - Brazil
E-mail: revmateria@gmail.com

rss_feed Acompañe los números de esta revista en su lector de RSS

Matéria (Rio de Janeiro)

Nuestra misión

Artículos más recientes

Noticias

Nuestra misión

Artigos mais recentes

Noticias

Artigos mais
recentes